From: Fugang Duan fugang.duan@nxp.com
[ Upstream commit 52c4a1a85f4b346c39c896c0168f4a843b3385ff ]
As we know that AVB is enabled by default, and the ENET IP design is queue 0 for best effort, queue 1&2 for AVB Class A&B. Bandwidth of each queue 1&2 set in driver is 50%, TX bandwidth fluctuated when selecting tx queues randomly with FEC_QUIRK_HAS_AVB quirk available.
This patch adds ndo_select_queue callback to select queues for transmitting to fix this issue. It will always return queue 0 if this is not a vlan packet, and return queue 1 or 2 based on priority of vlan packet.
You may complain that in fact we only use single queue for trasmitting if we are not targeted to VLAN. Yes, but seems we have no choice, since AVB is enabled when the driver probed, we can't switch this feature dynamicly. After compare multiple queues to single queue, TX throughput almost no improvement.
One way we can implemet is to configure the driver to multiple queues with Round-robin scheme by default. Then add ndo_setup_tc callback to enable/disable AVB feature for users. Unfortunately, ENET AVB IP seems not follow the standard 802.1Qav spec. We only can program DMAnCFG[IDLE_SLOPE] field to calculate bandwidth fraction. And idle slope is restricted to certain valus (a total of 19). It's far away from CBS QDisc implemented in Linux TC framework. If you strongly suggest to do this, I think we only can support limited numbers of bandwidth and reject others, but it's really urgly and wried.
With this patch, VLAN tagged packets route to queue 0/1/2 based on vlan priority; VLAN untagged packets route to queue 0.
Tested-by: Frieder Schrempf frieder.schrempf@kontron.de Reported-by: Frieder Schrempf frieder.schrempf@kontron.de Signed-off-by: Fugang Duan fugang.duan@nxp.com Signed-off-by: Joakim Zhang qiangqing.zhang@nxp.com Reported-by: kernel test robot lkp@intel.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/freescale/fec_main.c | 32 +++++++++++++++++++++++ 1 file changed, 32 insertions(+)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 15c9cffa8735..6c097ae3bac5 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -75,6 +75,8 @@ static void fec_enet_itr_coal_init(struct net_device *ndev);
#define DRIVER_NAME "fec"
+static const u16 fec_enet_vlan_pri_to_queue[8] = {0, 0, 1, 1, 1, 2, 2, 2}; + /* Pause frame feild and FIFO threshold */ #define FEC_ENET_FCE (1 << 5) #define FEC_ENET_RSEM_V 0x84 @@ -3228,10 +3230,40 @@ static int fec_set_features(struct net_device *netdev, return 0; }
+static u16 fec_enet_get_raw_vlan_tci(struct sk_buff *skb) +{ + struct vlan_ethhdr *vhdr; + unsigned short vlan_TCI = 0; + + if (skb->protocol == htons(ETH_P_ALL)) { + vhdr = (struct vlan_ethhdr *)(skb->data); + vlan_TCI = ntohs(vhdr->h_vlan_TCI); + } + + return vlan_TCI; +} + +static u16 fec_enet_select_queue(struct net_device *ndev, struct sk_buff *skb, + struct net_device *sb_dev) +{ + struct fec_enet_private *fep = netdev_priv(ndev); + u16 vlan_tag; + + if (!(fep->quirks & FEC_QUIRK_HAS_AVB)) + return netdev_pick_tx(ndev, skb, NULL); + + vlan_tag = fec_enet_get_raw_vlan_tci(skb); + if (!vlan_tag) + return vlan_tag; + + return fec_enet_vlan_pri_to_queue[vlan_tag >> 13]; +} + static const struct net_device_ops fec_netdev_ops = { .ndo_open = fec_enet_open, .ndo_stop = fec_enet_close, .ndo_start_xmit = fec_enet_start_xmit, + .ndo_select_queue = fec_enet_select_queue, .ndo_set_rx_mode = set_multicast_list, .ndo_validate_addr = eth_validate_addr, .ndo_tx_timeout = fec_timeout,