From: Al Cooper alcooperx@gmail.com
[ Upstream commit 209c805835b29495cf66cc705b206da8f4a68e6e ]
The 7211a0 has a tca_drv_sel bit in the USB SETUP register that should never be enabled. This feature is only used if there is a USB Type-C PHY, and the 7211 does not have one. If the bit is enabled, the VBUS signal will never be asserted. In the 7211a0, the bit was incorrectly defaulted to on so the driver had to clear the bit. In the 7211c0 the state was inverted so the driver should no longer clear the bit. This hasn't been a problem because all current 7211 boards don't use the VBUS signal, but there are some future customer boards that may use it.
Signed-off-by: Al Cooper alcooperx@gmail.com Acked-by: Florian Fainelli f.fainelli@gmail.com Link: https://lore.kernel.org/r/20201002190115.48017-1-alcooperx@gmail.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c | 5 ----- 1 file changed, 5 deletions(-)
diff --git a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c index 456dc4a100c20..e63457e145c71 100644 --- a/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c +++ b/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c @@ -270,11 +270,6 @@ static void usb_init_common_7211b0(struct brcm_usb_init_params *params) reg |= params->mode << USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT; brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
- /* Fix the incorrect default */ - reg = brcm_usb_readl(ctrl + USB_CTRL_SETUP); - reg &= ~USB_CTRL_SETUP_tca_drv_sel_MASK; - brcm_usb_writel(reg, ctrl + USB_CTRL_SETUP); - usb_init_common(params);
/*