From: Alain Volmat alain.volmat@foss.st.com
commit 0c21d02ca469574d2082379db52d1a27b99eed0c upstream.
While handling an error during transfer (ex: NACK), it could happen that the driver has already written data into TXDR before the transfer get stopped. This commit add TXDR Flush after end of transfer in case of error to avoid sending a wrong data on any other slave upon next transfer.
Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat alain.volmat@foss.st.com Reviewed-by: Pierre-Yves MORDRET pierre-yves.mordret@foss.st.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/i2c/busses/i2c-stm32f7.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)
--- a/drivers/i2c/busses/i2c-stm32f7.c +++ b/drivers/i2c/busses/i2c-stm32f7.c @@ -1696,6 +1696,16 @@ static int stm32f7_i2c_xfer(struct i2c_a time_left = wait_for_completion_timeout(&i2c_dev->complete, i2c_dev->adap.timeout); ret = f7_msg->result; + if (ret) { + /* + * It is possible that some unsent data have already been + * written into TXDR. To avoid sending old data in a + * further transfer, flush TXDR in case of any error + */ + writel_relaxed(STM32F7_I2C_ISR_TXE, + i2c_dev->base + STM32F7_I2C_ISR); + goto pm_free; + }
if (!time_left) { dev_dbg(i2c_dev->dev, "Access to slave 0x%x timed out\n", @@ -1744,8 +1754,16 @@ static int stm32f7_i2c_smbus_xfer(struct timeout = wait_for_completion_timeout(&i2c_dev->complete, i2c_dev->adap.timeout); ret = f7_msg->result; - if (ret) + if (ret) { + /* + * It is possible that some unsent data have already been + * written into TXDR. To avoid sending old data in a + * further transfer, flush TXDR in case of any error + */ + writel_relaxed(STM32F7_I2C_ISR_TXE, + i2c_dev->base + STM32F7_I2C_ISR); goto pm_free; + }
if (!timeout) { dev_dbg(dev, "Access to slave 0x%x timed out\n", f7_msg->addr);