Till DISPLAY12 the PIPE_MISC bits 5-7 are used to set the Dithering BPC, with valid values of 6, 8, 10 BPC. For ADLP+ these bits are used to set the PORT OUTPUT BPC, with valid values of: 6, 8, 10, 12 BPC, and need to be programmed whether dithering is enabled or not.
This patch: -corrects the bits 5-7 for PIPE MISC register for 12 BPC. -renames the bits and mask to have generic names for these bits for dithering bpc and port output bpc.
v3: Added a note for MIPI DSI which uses the PIPE_MISC for readout for pipe_bpp. (Uma Shankar)
v2: Added 'display' to the subject and fixes tag. (Uma Shankar)
Fixes: 756f85cffef2 ("drm/i915/bdw: Broadwell has PIPEMISC") Cc: Paulo Zanoni paulo.r.zanoni@intel.com (v1) Cc: Ville Syrjälä ville.syrjala@linux.intel.com Cc: Daniel Vetter daniel.vetter@ffwll.ch Cc: Jani Nikula jani.nikula@linux.intel.com Cc: Joonas Lahtinen joonas.lahtinen@linux.intel.com Cc: Rodrigo Vivi rodrigo.vivi@intel.com Cc: intel-gfx@lists.freedesktop.org Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com --- drivers/gpu/drm/i915/display/intel_display.c | 34 ++++++++++++++------ drivers/gpu/drm/i915/i915_reg.h | 16 ++++++--- 2 files changed, 35 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c index b25c596f6f7e..a257e5dc381c 100644 --- a/drivers/gpu/drm/i915/display/intel_display.c +++ b/drivers/gpu/drm/i915/display/intel_display.c @@ -5838,16 +5838,18 @@ static void bdw_set_pipemisc(const struct intel_crtc_state *crtc_state)
switch (crtc_state->pipe_bpp) { case 18: - val |= PIPEMISC_DITHER_6_BPC; + val |= PIPEMISC_6_BPC; break; case 24: - val |= PIPEMISC_DITHER_8_BPC; + val |= PIPEMISC_8_BPC; break; case 30: - val |= PIPEMISC_DITHER_10_BPC; + val |= PIPEMISC_10_BPC; break; case 36: - val |= PIPEMISC_DITHER_12_BPC; + /* Port output 12BPC defined for ADLP+ */ + if (DISPLAY_VER(dev_priv) > 12) + val |= PIPEMISC_12_BPC_ADLP; break; default: MISSING_CASE(crtc_state->pipe_bpp); @@ -5900,15 +5902,27 @@ int bdw_get_pipemisc_bpp(struct intel_crtc *crtc)
tmp = intel_de_read(dev_priv, PIPEMISC(crtc->pipe));
- switch (tmp & PIPEMISC_DITHER_BPC_MASK) { - case PIPEMISC_DITHER_6_BPC: + switch (tmp & PIPEMISC_BPC_MASK) { + case PIPEMISC_6_BPC: return 18; - case PIPEMISC_DITHER_8_BPC: + case PIPEMISC_8_BPC: return 24; - case PIPEMISC_DITHER_10_BPC: + case PIPEMISC_10_BPC: return 30; - case PIPEMISC_DITHER_12_BPC: - return 36; + /* + * PORT OUTPUT 12 BPC defined for ADLP+. + * + * TODO: + * For previous platforms with DSI interface, bits 5:7 + * are used for storing pipe_bpp irrespective of dithering. + * Since the value of 12 BPC is not defined for these bits + * on older platforms, need to find a workaround for 12 BPC + * MIPI DSI HW readout. + */ + case PIPEMISC_12_BPC_ADLP: + if (DISPLAY_VER(dev_priv) > 12) + return 36; + fallthrough; default: MISSING_CASE(tmp); return 0; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 167eaa87501b..664970f2bc62 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -6203,11 +6203,17 @@ enum { #define PIPEMISC_HDR_MODE_PRECISION (1 << 23) /* icl+ */ #define PIPEMISC_OUTPUT_COLORSPACE_YUV (1 << 11) #define PIPEMISC_PIXEL_ROUNDING_TRUNC REG_BIT(8) /* tgl+ */ -#define PIPEMISC_DITHER_BPC_MASK (7 << 5) -#define PIPEMISC_DITHER_8_BPC (0 << 5) -#define PIPEMISC_DITHER_10_BPC (1 << 5) -#define PIPEMISC_DITHER_6_BPC (2 << 5) -#define PIPEMISC_DITHER_12_BPC (3 << 5) +/* + * For Display < 13, Bits 5-7 of PIPE MISC represent DITHER BPC with + * valid values of: 6, 8, 10 BPC. + * ADLP+, the bits 5-7 represent PORT OUTPUT BPC with valid values of: + * 6, 8, 10, 12 BPC. + */ +#define PIPEMISC_BPC_MASK (7 << 5) +#define PIPEMISC_8_BPC (0 << 5) +#define PIPEMISC_10_BPC (1 << 5) +#define PIPEMISC_6_BPC (2 << 5) +#define PIPEMISC_12_BPC_ADLP (4 << 5) /* adlp+ */ #define PIPEMISC_DITHER_ENABLE (1 << 4) #define PIPEMISC_DITHER_TYPE_MASK (3 << 2) #define PIPEMISC_DITHER_TYPE_SP (0 << 2)