The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x 7d08f21f8c6307cb05cabb8d86e90ff6ccba57e9 # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2023112024-timing-octane-cc05@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
7d08f21f8c63 ("x86/PCI: Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4") 606012dddebb ("PCI: Fix up L1SS capability for Intel Apollo Lake Root Port")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 7d08f21f8c6307cb05cabb8d86e90ff6ccba57e9 Mon Sep 17 00:00:00 2001 From: Mario Limonciello mario.limonciello@amd.com Date: Wed, 4 Oct 2023 09:49:59 -0500 Subject: [PATCH] x86/PCI: Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
Iain reports that USB devices can't be used to wake a Lenovo Z13 from suspend. This occurs because on some AMD platforms, even though the Root Ports advertise PME_Support for D3hot and D3cold, wakeup events from devices on a USB4 controller don't result in wakeup interrupts from the Root Port when amd-pmc has put the platform in a hardware sleep state.
If amd-pmc will be involved in the suspend, remove D3hot and D3cold from the PME_Support mask of Root Ports above USB4 controllers so we avoid those states if we need wakeups.
Restore D3 support at resume so that it can be used by runtime suspend.
This affects both AMD Rembrandt and Phoenix SoCs.
"pm_suspend_target_state == PM_SUSPEND_ON" means we're doing runtime suspend, and amd-pmc will not be involved. In that case PMEs work as advertised in D3hot/D3cold, so we don't need to do anything.
Note that amd-pmc is technically optional, and there's no need for this quirk if it's not present, but we assume it's always present because power consumption is so high without it.
Fixes: 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") Link: https://lore.kernel.org/r/20231004144959.158840-1-mario.limonciello@amd.com Reported-by: Iain Lane iain@orangesquash.org.uk Closes: https://forums.lenovo.com/t5/Ubuntu/Z13-can-t-resume-from-suspend-with-exter... Signed-off-by: Mario Limonciello mario.limonciello@amd.com [bhelgaas: commit log, move to arch/x86/pci/fixup.c, add #includes] Signed-off-by: Bjorn Helgaas bhelgaas@google.com Cc: stable@vger.kernel.org
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c index e3ec02e6ac9f..f347c20247d3 100644 --- a/arch/x86/pci/fixup.c +++ b/arch/x86/pci/fixup.c @@ -3,9 +3,11 @@ * Exceptions for specific devices. Usually work-arounds for fatal design flaws. */
+#include <linux/bitfield.h> #include <linux/delay.h> #include <linux/dmi.h> #include <linux/pci.h> +#include <linux/suspend.h> #include <linux/vgaarb.h> #include <asm/amd_nb.h> #include <asm/hpet.h> @@ -904,3 +906,60 @@ static void chromeos_fixup_apl_pci_l1ss_capability(struct pci_dev *dev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x5ad6, chromeos_save_apl_pci_l1ss_capability); DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x5ad6, chromeos_fixup_apl_pci_l1ss_capability); + +#ifdef CONFIG_SUSPEND +/* + * Root Ports on some AMD SoCs advertise PME_Support for D3hot and D3cold, but + * if the SoC is put into a hardware sleep state by the amd-pmc driver, the + * Root Ports don't generate wakeup interrupts for USB devices. + * + * When suspending, remove D3hot and D3cold from the PME_Support advertised + * by the Root Port so we don't use those states if we're expecting wakeup + * interrupts. Restore the advertised PME_Support when resuming. + */ +static void amd_rp_pme_suspend(struct pci_dev *dev) +{ + struct pci_dev *rp; + + /* + * PM_SUSPEND_ON means we're doing runtime suspend, which means + * amd-pmc will not be involved so PMEs during D3 work as advertised. + * + * The PMEs *do* work if amd-pmc doesn't put the SoC in the hardware + * sleep state, but we assume amd-pmc is always present. + */ + if (pm_suspend_target_state == PM_SUSPEND_ON) + return; + + rp = pcie_find_root_port(dev); + if (!rp->pm_cap) + return; + + rp->pme_support &= ~((PCI_PM_CAP_PME_D3hot|PCI_PM_CAP_PME_D3cold) >> + PCI_PM_CAP_PME_SHIFT); + dev_info_once(&rp->dev, "quirk: disabling D3cold for suspend\n"); +} + +static void amd_rp_pme_resume(struct pci_dev *dev) +{ + struct pci_dev *rp; + u16 pmc; + + rp = pcie_find_root_port(dev); + if (!rp->pm_cap) + return; + + pci_read_config_word(rp, rp->pm_cap + PCI_PM_PMC, &pmc); + rp->pme_support = FIELD_GET(PCI_PM_CAP_PME_MASK, pmc); +} +/* Rembrandt (yellow_carp) */ +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_AMD, 0x162e, amd_rp_pme_suspend); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x162e, amd_rp_pme_resume); +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_AMD, 0x162f, amd_rp_pme_suspend); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x162f, amd_rp_pme_resume); +/* Phoenix (pink_sardine) */ +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_AMD, 0x1668, amd_rp_pme_suspend); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x1668, amd_rp_pme_resume); +DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_AMD, 0x1669, amd_rp_pme_suspend); +DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, 0x1669, amd_rp_pme_resume); +#endif /* CONFIG_SUSPEND */