The Tegra serial driver always prints an error message when enabling the FIFO for devices that have support for checking the FIFO enable status. Fix this by only display the error message, when an error occurs.
Fixes: 222dcdff3405 ("serial: tegra: check for FIFO mode enabled status") Cc: stable@vger.kernel.org Signed-off-by: Jon Hunter jonathanh@nvidia.com --- drivers/tty/serial/serial-tegra.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index 222032792d6c..cd481f7ba8eb 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -1045,9 +1045,10 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
if (tup->cdata->fifo_mode_enable_status) { ret = tegra_uart_wait_fifo_mode_enabled(tup); - dev_err(tup->uport.dev, "FIFO mode not enabled\n"); - if (ret < 0) + if (ret < 0) { + dev_err(tup->uport.dev, "FIFO mode not enabled\n"); return ret; + } } else { /* * For all tegra devices (up to t210), there is a hardware