From: Samuel Holland samuel@sholland.org
commit a84014e1db35d8e7af09878d0b4bf30804fb17d5 upstream.
When enabling ARCH_SUNXI from allnoconfig, SUNXI_SRAM is enabled, but not REGMAP_MMIO, so the kernel fails to link with an undefined reference to __devm_regmap_init_mmio_clk. Select REGMAP_MMIO, as suggested in drivers/base/regmap/Kconfig.
This creates the following dependency loop:
drivers/of/Kconfig:68: symbol OF_IRQ depends on IRQ_DOMAIN kernel/irq/Kconfig:63: symbol IRQ_DOMAIN is selected by REGMAP drivers/base/regmap/Kconfig:7: symbol REGMAP default is visible depending on REGMAP_MMIO drivers/base/regmap/Kconfig:39: symbol REGMAP_MMIO is selected by SUNXI_SRAM drivers/soc/sunxi/Kconfig:4: symbol SUNXI_SRAM is selected by USB_MUSB_SUNXI drivers/usb/musb/Kconfig:63: symbol USB_MUSB_SUNXI depends on GENERIC_PHY drivers/phy/Kconfig:7: symbol GENERIC_PHY is selected by PHY_BCM_NS_USB3 drivers/phy/broadcom/Kconfig:29: symbol PHY_BCM_NS_USB3 depends on MDIO_BUS drivers/net/phy/Kconfig:12: symbol MDIO_BUS default is visible depending on PHYLIB drivers/net/phy/Kconfig:181: symbol PHYLIB is selected by ARC_EMAC_CORE drivers/net/ethernet/arc/Kconfig:18: symbol ARC_EMAC_CORE is selected by ARC_EMAC drivers/net/ethernet/arc/Kconfig:24: symbol ARC_EMAC depends on OF_IRQ
To fix the circular dependency, make USB_MUSB_SUNXI select GENERIC_PHY instead of depending on it. This matches the use of GENERIC_PHY by all but two other drivers.
Cc: stable@vger.kernel.org # 4.19 Fixes: 5828729bebbb ("soc: sunxi: export a regmap for EMAC clock reg on A64") Signed-off-by: Samuel Holland samuel@sholland.org Acked-by: Maxime Ripard maxime.ripard@bootlin.com Signed-off-by: Bin Liu b-liu@ti.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/soc/sunxi/Kconfig | 1 + drivers/usb/musb/Kconfig | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/soc/sunxi/Kconfig +++ b/drivers/soc/sunxi/Kconfig @@ -4,6 +4,7 @@ config SUNXI_SRAM bool default ARCH_SUNXI + select REGMAP_MMIO help Say y here to enable the SRAM controller support. This device is responsible on mapping the SRAM in the sunXi SoCs --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -66,7 +66,7 @@ config USB_MUSB_SUNXI depends on NOP_USB_XCEIV depends on PHY_SUN4I_USB depends on EXTCON - depends on GENERIC_PHY + select GENERIC_PHY select SUNXI_SRAM
config USB_MUSB_DAVINCI