From: Marc Kleine-Budde mkl@pengutronix.de
[ Upstream commit ed7815db70d17b1741883f2da8e1d80bc2efe517 ]
A SPI transfer defines the _maximum_ speed of the SPI transfer. However the driver doesn't take into account that the clock divider is always rounded down (due to integer arithmetics). This results in a too high clock rate for the SPI transfer.
E.g.: with a mclk_rate of 24 MHz and a SPI transfer speed of 10 MHz, the original code calculates a reg of "0", which results in a effective divider of "2" and a 12 MHz clock for the SPI transfer.
This patch fixes the issue by using DIV_ROUND_UP() instead of a plain integer division.
While there simplify the divider calculation for the CDR1 case, use order_base_2() instead of two ilog2() calculations.
Fixes: 3558fe900e8a ("spi: sunxi: Add Allwinner A31 SPI controller driver") Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Acked-by: Maxime Ripard mripard@kernel.org Link: https://lore.kernel.org/r/20200706143443.9855-2-mkl@pengutronix.de Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-sun6i.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c index ec7967be9e2f5..956df79035d56 100644 --- a/drivers/spi/spi-sun6i.c +++ b/drivers/spi/spi-sun6i.c @@ -198,7 +198,7 @@ static int sun6i_spi_transfer_one(struct spi_master *master, struct spi_transfer *tfr) { struct sun6i_spi *sspi = spi_master_get_devdata(master); - unsigned int mclk_rate, div, timeout; + unsigned int mclk_rate, div, div_cdr1, div_cdr2, timeout; unsigned int start, end, tx_time; unsigned int trig_level; unsigned int tx_len = 0; @@ -287,14 +287,12 @@ static int sun6i_spi_transfer_one(struct spi_master *master, * First try CDR2, and if we can't reach the expected * frequency, fall back to CDR1. */ - div = mclk_rate / (2 * tfr->speed_hz); - if (div <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) { - if (div > 0) - div--; - - reg = SUN6I_CLK_CTL_CDR2(div) | SUN6I_CLK_CTL_DRS; + div_cdr1 = DIV_ROUND_UP(mclk_rate, tfr->speed_hz); + div_cdr2 = DIV_ROUND_UP(div_cdr1, 2); + if (div_cdr2 <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) { + reg = SUN6I_CLK_CTL_CDR2(div_cdr2 - 1) | SUN6I_CLK_CTL_DRS; } else { - div = ilog2(mclk_rate) - ilog2(tfr->speed_hz); + div = min(SUN6I_CLK_CTL_CDR1_MASK, order_base_2(div_cdr1)); reg = SUN6I_CLK_CTL_CDR1(div); }