From: Álvaro Fernández Rojas noltari@gmail.com
[ Upstream commit f5200c14242fb8fa4a9b93f7fd4064d237e58785 ]
Hamming ECC doesn't cover the OOB data, so reading or writing OOB shall always be done without ECC enabled. This is a problem when adding JFFS2 cleanmarkers to erased blocks. If JFFS2 clenmarkers are added to the OOB with ECC enabled, OOB bytes will be changed from ff ff ff to 00 00 00, reporting incorrect ECC errors.
Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: Álvaro Fernández Rojas noltari@gmail.com Acked-by: Brian Norris computersforpeace@gmail.com Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com Link: https://lore.kernel.org/linux-mtd/20210224080210.23686-1-noltari@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mtd/nand/raw/brcmnand/brcmnand.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c index e9ad8bb82f44..0f3c09fb9c34 100644 --- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c +++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c @@ -2364,6 +2364,12 @@ static int brcmnand_attach_chip(struct nand_chip *chip)
ret = brcmstb_choose_ecc_layout(host);
+ /* If OOB is written with ECC enabled it will cause ECC errors */ + if (is_hamming_ecc(host->ctrl, &host->hwcfg)) { + chip->ecc.write_oob = brcmnand_write_oob_raw; + chip->ecc.read_oob = brcmnand_read_oob_raw; + } + return ret; }