From: Yangbo Lu yangbo.lu@nxp.com
commit 2aa3d826adb578b26629a79b775a552cfe3fedf7 upstream.
This patch is to fix operating in esdhc_reset() for different controller versions, and to add bus-width restoring after data reset for eSDHC (verdor version <= 2.2).
Also add annotation for understanding.
Signed-off-by: Yangbo Lu yangbo.lu@nxp.com Acked-by: Adrian Hunter adrian.hunter@intel.com Link: https://lore.kernel.org/r/20200108040713.38888-1-yangbo.lu@nxp.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/mmc/host/sdhci-of-esdhc.c | 43 ++++++++++++++++++++++++++++++++++---- 1 file changed, 39 insertions(+), 4 deletions(-)
--- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -758,23 +758,58 @@ static void esdhc_reset(struct sdhci_hos { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); - u32 val; + u32 val, bus_width = 0;
+ /* + * Add delay to make sure all the DMA transfers are finished + * for quirk. + */ if (esdhc->quirk_delay_before_data_reset && (mask & SDHCI_RESET_DATA) && (host->flags & SDHCI_REQ_USE_DMA)) mdelay(5);
+ /* + * Save bus-width for eSDHC whose vendor version is 2.2 + * or lower for data reset. + */ + if ((mask & SDHCI_RESET_DATA) && + (esdhc->vendor_ver <= VENDOR_V_22)) { + val = sdhci_readl(host, ESDHC_PROCTL); + bus_width = val & ESDHC_CTRL_BUSWIDTH_MASK; + } + sdhci_reset(host, mask);
- sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); - sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + /* + * Restore bus-width setting and interrupt registers for eSDHC + * whose vendor version is 2.2 or lower for data reset. + */ + if ((mask & SDHCI_RESET_DATA) && + (esdhc->vendor_ver <= VENDOR_V_22)) { + val = sdhci_readl(host, ESDHC_PROCTL); + val &= ~ESDHC_CTRL_BUSWIDTH_MASK; + val |= bus_width; + sdhci_writel(host, val, ESDHC_PROCTL); + + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + }
- if (mask & SDHCI_RESET_ALL) { + /* + * Some bits have to be cleaned manually for eSDHC whose spec + * version is higher than 3.0 for all reset. + */ + if ((mask & SDHCI_RESET_ALL) && + (esdhc->spec_ver >= SDHCI_SPEC_300)) { val = sdhci_readl(host, ESDHC_TBCTL); val &= ~ESDHC_TB_EN; sdhci_writel(host, val, ESDHC_TBCTL);
+ /* + * Initialize eSDHC_DLLCFG1[DLL_PD_PULSE_STRETCH_SEL] to + * 0 for quirk. + */ if (esdhc->quirk_unreliable_pulse_detection) { val = sdhci_readl(host, ESDHC_DLLCFG1); val &= ~ESDHC_DLL_PD_PULSE_STRETCH_SEL;