The patch
spi: spi-gpio: fix SPI_CS_HIGH capability
has been applied to the spi tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From b89fefda7d4e3a649129584d855be233c7465264 Mon Sep 17 00:00:00 2001
From: Russell King rmk+kernel@armlinux.org.uk Date: Thu, 21 Feb 2019 15:59:58 +0000 Subject: [PATCH] spi: spi-gpio: fix SPI_CS_HIGH capability
spi-gpio is capable of dealing with active-high chip-selects. Unfortunately, commit 4b859db2c606 ("spi: spi-gpio: add SPI_3WIRE support") broke this by setting master->mode_bits, which overrides the setting in the spi-bitbang code. Fix this.
[Fixed a trivial conflict with SPI_3WIRE_HIZ support -- broonie]
Fixes: 4b859db2c606 ("spi: spi-gpio: add SPI_3WIRE support") Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Mark Brown broonie@kernel.org Cc: stable@vger.kernel.org --- drivers/spi/spi-gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index a4aee26028cd..53b35c56a557 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -428,7 +428,8 @@ static int spi_gpio_probe(struct platform_device *pdev) return status;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32); - master->mode_bits = SPI_3WIRE | SPI_3WIRE_HIZ | SPI_CPHA | SPI_CPOL; + master->mode_bits = SPI_3WIRE | SPI_3WIRE_HIZ | SPI_CPHA | SPI_CPOL | + SPI_CS_HIGH; master->flags = master_flags; master->bus_num = pdev->id; /* The master needs to think there is a chipselect even if not connected */ @@ -455,7 +456,6 @@ static int spi_gpio_probe(struct platform_device *pdev) spi_gpio->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_spec_txrx_word_mode3; } spi_gpio->bitbang.setup_transfer = spi_bitbang_setup_transfer; - spi_gpio->bitbang.flags = SPI_CS_HIGH;
status = spi_bitbang_start(&spi_gpio->bitbang); if (status)