On Sun, 4 Dec 2022 at 10:46, Krzysztof Kozlowski krzysztof.kozlowski@linaro.org wrote:
While changing node names of APQ8084 SDHCI, the ones in IFC6540 board were not updated leading to disabled and misconfigured SDHCI.
Cc: stable@vger.kernel.org Fixes: 2477d81901a2 ("ARM: dts: qcom: Fix sdhci node names - use 'mmc@'") Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org
Minor nit below.
arch/arm/boot/dts/qcom-apq8084-ifc6540.dts | 20 ++++++++++---------- arch/arm/boot/dts/qcom-apq8084.dtsi | 4 ++-- 2 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts index 44cd72f1b1be..116e59a3b76d 100644 --- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts @@ -19,16 +19,16 @@ soc { serial@f995e000 { status = "okay"; };
};+};
sdhci@f9824900 {bus-width = <8>;non-removable;status = "okay";};+&sdhc_1 {
bus-width = <8>;non-removable;status = "okay";+};
sdhci@f98a4900 {cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;bus-width = <4>;};};+&sdhc_2 {
cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;bus-width = <4>;
Technically this will still be disabled, as there is no 'status = "okay";' here.
}; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index fe30abfff90a..4b0d2b4f4b6a 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -421,7 +421,7 @@ blsp2_uart2: serial@f995e000 { status = "disabled"; };
mmc@f9824900 {
sdhc_1: mmc@f9824900 { compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc", "core";@@ -434,7 +434,7 @@ mmc@f9824900 { status = "disabled"; };
mmc@f98a4900 {
sdhc_2: mmc@f98a4900 { compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc", "core";-- 2.34.1