6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ciprian Marian Costea ciprianmarian.costea@oss.nxp.com
[ Upstream commit 8c652cf030a769fbfc73cfc280ed3f1656343c35 ]
Introduce 'FLEXCAN_QUIRK_SECONDARY_MB_IRQ' quirk to handle a FlexCAN hardware module integration particularity where two ranges of mailboxes are controlled by separate hardware interrupt lines. The same 'flexcan_irq' handler is used for both separate mailbox interrupt lines, with no other changes.
Signed-off-by: Ciprian Marian Costea ciprianmarian.costea@oss.nxp.com Reviewed-by: Vincent Mailhol mailhol.vincent@wanadoo.fr Link: https://patch.msgid.link/20250113120704.522307-3-ciprianmarian.costea@oss.nx... [mkl: flexcan_open(): change order and free irq_secondary_mb first] Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/can/flexcan/flexcan-core.c | 24 +++++++++++++++++++++++- drivers/net/can/flexcan/flexcan.h | 5 +++++ 2 files changed, 28 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/flexcan/flexcan-core.c b/drivers/net/can/flexcan/flexcan-core.c index b080740bcb104..1a94586cbd11e 100644 --- a/drivers/net/can/flexcan/flexcan-core.c +++ b/drivers/net/can/flexcan/flexcan-core.c @@ -1762,14 +1762,25 @@ static int flexcan_open(struct net_device *dev) goto out_free_irq_boff; }
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SECONDARY_MB_IRQ) { + err = request_irq(priv->irq_secondary_mb, + flexcan_irq, IRQF_SHARED, dev->name, dev); + if (err) + goto out_free_irq_err; + } + flexcan_chip_interrupts_enable(dev);
netif_start_queue(dev);
return 0;
+ out_free_irq_err: + if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_IRQ_3) + free_irq(priv->irq_err, dev); out_free_irq_boff: - free_irq(priv->irq_boff, dev); + if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_IRQ_3) + free_irq(priv->irq_boff, dev); out_free_irq: free_irq(dev->irq, dev); out_can_rx_offload_disable: @@ -1794,6 +1805,9 @@ static int flexcan_close(struct net_device *dev) netif_stop_queue(dev); flexcan_chip_interrupts_disable(dev);
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SECONDARY_MB_IRQ) + free_irq(priv->irq_secondary_mb, dev); + if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_IRQ_3) { free_irq(priv->irq_err, dev); free_irq(priv->irq_boff, dev); @@ -2187,6 +2201,14 @@ static int flexcan_probe(struct platform_device *pdev) } }
+ if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SECONDARY_MB_IRQ) { + priv->irq_secondary_mb = platform_get_irq_byname(pdev, "mb-1"); + if (priv->irq_secondary_mb < 0) { + err = priv->irq_secondary_mb; + goto failed_platform_get_irq; + } + } + if (priv->devtype_data.quirks & FLEXCAN_QUIRK_SUPPORT_FD) { priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD | CAN_CTRLMODE_FD_NON_ISO; diff --git a/drivers/net/can/flexcan/flexcan.h b/drivers/net/can/flexcan/flexcan.h index 4933d8c7439e6..2cf886618c962 100644 --- a/drivers/net/can/flexcan/flexcan.h +++ b/drivers/net/can/flexcan/flexcan.h @@ -70,6 +70,10 @@ #define FLEXCAN_QUIRK_SUPPORT_RX_FIFO BIT(16) /* Setup stop mode with ATF SCMI protocol to support wakeup */ #define FLEXCAN_QUIRK_SETUP_STOP_MODE_SCMI BIT(17) +/* Device has two separate interrupt lines for two mailbox ranges, which + * both need to have an interrupt handler registered. + */ +#define FLEXCAN_QUIRK_SECONDARY_MB_IRQ BIT(18)
struct flexcan_devtype_data { u32 quirks; /* quirks needed for different IP cores */ @@ -107,6 +111,7 @@ struct flexcan_priv {
int irq_boff; int irq_err; + int irq_secondary_mb;
/* IPC handle when setup stop mode by System Controller firmware(scfw) */ struct imx_sc_ipc *sc_ipc_handle;