6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Diederik de Haas didi.debian@cknow.org
[ Upstream commit 08846522d9a7bccf18d4f97c3f39d03c7a193970 ]
Paragraph "3.4 Power up Timing Sequence" of the AzureWave-CM256SM datasheet mentions the following about the BT_REG_ON pin, which is connected to GPIO0_C4_d:
When this pin is low and WL_REG_ON is high, the BT section is in reset.
Therefor set that pin to GPIO_ACTIVE_HIGH so that it can be pulled low for a reset. If set to GPIO_ACTIVE_LOW, the following errors are observed:
Bluetooth: hci0: command 0x0c03 tx timeout Bluetooth: hci0: BCM: Reset failed (-110)
So fix the GPIO polarity by setting it to ACTIVE_HIGH. This also matches what other devices with the same BT device have.
Fixes: 2b6a3f857550 ("arm64: dts: rockchip: Fix reset-gpios property on brcm BT nodes") Signed-off-by: Diederik de Haas didi.debian@cknow.org Link: https://lore.kernel.org/r/20241018145053.11928-2-didi.debian@cknow.org Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi index 27d89f48c42bd..9944c9d4ca9fe 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi @@ -687,7 +687,7 @@ host-wakeup-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>; pinctrl-names = "default"; - shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>; + shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; vbat-supply = <&vcc_wl>; vddio-supply = <&vcca_1v8_pmu>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi index e9fa9bee995ae..1e36f73840dad 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi @@ -404,7 +404,7 @@ host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>; - shutdown-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>; + shutdown-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; vbat-supply = <&vcc_3v3>; vddio-supply = <&vcc_1v8>; };