From: Sasha Neftin sasha.neftin@intel.com
[ Upstream commit 1866aa0d0d6492bc2f8d22d0df49abaccf50cddd ]
Disable the OEM bit/Gig Disable/restart AN impact and disable the PHY LAN connected device (LCD) reset during power management flows. This fixes possible HW unit hangs on the s0ix exit on some corporate ADL platforms.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821 Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Suggested-by: Dima Ruinskiy dima.ruinskiy@intel.com Suggested-by: Nir Efrati nir.efrati@intel.com Signed-off-by: Sasha Neftin sasha.neftin@intel.com Tested-by: Kai-Heng Feng kai.heng.feng@canonical.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/e1000e/hw.h | 1 + drivers/net/ethernet/intel/e1000e/ich8lan.c | 4 ++++ drivers/net/ethernet/intel/e1000e/ich8lan.h | 1 + drivers/net/ethernet/intel/e1000e/netdev.c | 26 +++++++++++++++++++++ 4 files changed, 32 insertions(+)
diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h index bcf680e83811..13382df2f2ef 100644 --- a/drivers/net/ethernet/intel/e1000e/hw.h +++ b/drivers/net/ethernet/intel/e1000e/hw.h @@ -630,6 +630,7 @@ struct e1000_phy_info { bool disable_polarity_correction; bool is_mdix; bool polarity_correction; + bool reset_disable; bool speed_downgraded; bool autoneg_wait_to_complete; }; diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index a3e42d06c63e..d60e2016d03c 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -2050,6 +2050,10 @@ static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw) bool blocked = false; int i = 0;
+ /* Check the PHY (LCD) reset flag */ + if (hw->phy.reset_disable) + return true; + while ((blocked = !(er32(FWSM) & E1000_ICH_FWSM_RSPCIPHY)) && (i++ < 30)) usleep_range(10000, 11000); diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index 2504b11c3169..638a3ddd7ada 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -271,6 +271,7 @@ #define I217_CGFREG_ENABLE_MTA_RESET 0x0002 #define I217_MEMPWR PHY_REG(772, 26) #define I217_MEMPWR_DISABLE_SMB_RELEASE 0x0010 +#define I217_MEMPWR_MOEM 0x1000
/* Receive Address Initial CRC Calculation */ #define E1000_PCH_RAICC(_n) (0x05F50 + ((_n) * 4)) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index c063128ed1df..f2db4ff0003f 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -6991,8 +6991,21 @@ static __maybe_unused int e1000e_pm_suspend(struct device *dev) struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev)); struct e1000_adapter *adapter = netdev_priv(netdev); struct pci_dev *pdev = to_pci_dev(dev); + struct e1000_hw *hw = &adapter->hw; + u16 phy_data; int rc;
+ if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID && + hw->mac.type >= e1000_pch_adp) { + /* Mask OEM Bits / Gig Disable / Restart AN (772_26[12] = 1) */ + e1e_rphy(hw, I217_MEMPWR, &phy_data); + phy_data |= I217_MEMPWR_MOEM; + e1e_wphy(hw, I217_MEMPWR, phy_data); + + /* Disable LCD reset */ + hw->phy.reset_disable = true; + } + e1000e_flush_lpic(pdev);
e1000e_pm_freeze(dev); @@ -7014,6 +7027,8 @@ static __maybe_unused int e1000e_pm_resume(struct device *dev) struct net_device *netdev = pci_get_drvdata(to_pci_dev(dev)); struct e1000_adapter *adapter = netdev_priv(netdev); struct pci_dev *pdev = to_pci_dev(dev); + struct e1000_hw *hw = &adapter->hw; + u16 phy_data; int rc;
/* Introduce S0ix implementation */ @@ -7024,6 +7039,17 @@ static __maybe_unused int e1000e_pm_resume(struct device *dev) if (rc) return rc;
+ if (er32(FWSM) & E1000_ICH_FWSM_FW_VALID && + hw->mac.type >= e1000_pch_adp) { + /* Unmask OEM Bits / Gig Disable / Restart AN 772_26[12] = 0 */ + e1e_rphy(hw, I217_MEMPWR, &phy_data); + phy_data &= ~I217_MEMPWR_MOEM; + e1e_wphy(hw, I217_MEMPWR, phy_data); + + /* Enable LCD reset */ + hw->phy.reset_disable = false; + } + return e1000e_pm_thaw(dev); }