This is an automatic generated email to let you know that the following patch were queued:
Subject: media: imx335: Fix reset-gpio handling Author: Umang Jain umang.jain@ideasonboard.com Date: Fri Aug 30 11:41:52 2024 +0530
Rectify the logical value of reset-gpio so that it is set to 0 (disabled) during power-on and to 1 (enabled) during power-off.
Set the reset-gpio to GPIO_OUT_HIGH at initialization time to make sure it starts off in reset. Also drop the "Set XCLR" comment which is not-so-informative.
The existing usage of imx335 had reset-gpios polarity inverted (GPIO_ACTIVE_HIGH) in their device-tree sources. With this patch included, those DTS will not be able to stream imx335 anymore. The reset-gpio polarity will need to be rectified in the device-tree sources as shown in [1] example, in order to get imx335 functional again (as it remains in reset prior to this fix).
Cc: stable@vger.kernel.org Fixes: 45d19b5fb9ae ("media: i2c: Add imx335 camera sensor driver") Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Link: https://lore.kernel.org/linux-media/20240729110437.199428-1-umang.jain@ideas... Signed-off-by: Umang Jain umang.jain@ideasonboard.com Signed-off-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl
drivers/media/i2c/imx335.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
---
diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c index 990d74214cc2..54a1de53d497 100644 --- a/drivers/media/i2c/imx335.c +++ b/drivers/media/i2c/imx335.c @@ -997,7 +997,7 @@ static int imx335_parse_hw_config(struct imx335 *imx335)
/* Request optional reset pin */ imx335->reset_gpio = devm_gpiod_get_optional(imx335->dev, "reset", - GPIOD_OUT_LOW); + GPIOD_OUT_HIGH); if (IS_ERR(imx335->reset_gpio)) { dev_err(imx335->dev, "failed to get reset gpio %ld\n", PTR_ERR(imx335->reset_gpio)); @@ -1110,8 +1110,7 @@ static int imx335_power_on(struct device *dev)
usleep_range(500, 550); /* Tlow */
- /* Set XCLR */ - gpiod_set_value_cansleep(imx335->reset_gpio, 1); + gpiod_set_value_cansleep(imx335->reset_gpio, 0);
ret = clk_prepare_enable(imx335->inclk); if (ret) { @@ -1124,7 +1123,7 @@ static int imx335_power_on(struct device *dev) return 0;
error_reset: - gpiod_set_value_cansleep(imx335->reset_gpio, 0); + gpiod_set_value_cansleep(imx335->reset_gpio, 1); regulator_bulk_disable(ARRAY_SIZE(imx335_supply_name), imx335->supplies);
return ret; @@ -1141,7 +1140,7 @@ static int imx335_power_off(struct device *dev) struct v4l2_subdev *sd = dev_get_drvdata(dev); struct imx335 *imx335 = to_imx335(sd);
- gpiod_set_value_cansleep(imx335->reset_gpio, 0); + gpiod_set_value_cansleep(imx335->reset_gpio, 1); clk_disable_unprepare(imx335->inclk); regulator_bulk_disable(ARRAY_SIZE(imx335_supply_name), imx335->supplies);