From: Vadim Pasternak vadimp@mellanox.com
[ Upstream commit 9b8737788af6c76ef93e3161ee2cdc4ddcc034ca ]
Fix wrong reading of upper pages for SFP EEPROM. According to "Memory Organization" figure in SFF-8472 spec: When reading upper pages 1, 2 and 3 the offset should be set relative to zero and I2C high address 0x51 [1010001X (A2h)] is to be used.
Fixes: a45bfb5a5070 ("mlxsw: core: Extend QSFP EEPROM size for ethtool") Signed-off-by: Vadim Pasternak vadimp@mellanox.com Reviewed-by: Jiri Pirko jiri@mellanox.com Signed-off-by: Ido Schimmel idosch@mellanox.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/mellanox/mlxsw/core_env.c | 48 ++++++++++++------- 1 file changed, 32 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_env.c b/drivers/net/ethernet/mellanox/mlxsw/core_env.c index 08215fed193d3..a7d86df7123ff 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/core_env.c +++ b/drivers/net/ethernet/mellanox/mlxsw/core_env.c @@ -45,7 +45,7 @@ static int mlxsw_env_validate_cable_ident(struct mlxsw_core *core, int id, static int mlxsw_env_query_module_eeprom(struct mlxsw_core *mlxsw_core, int module, u16 offset, u16 size, void *data, - unsigned int *p_read_size) + bool qsfp, unsigned int *p_read_size) { char eeprom_tmp[MLXSW_REG_MCIA_EEPROM_SIZE]; char mcia_pl[MLXSW_REG_MCIA_LEN]; @@ -54,6 +54,10 @@ mlxsw_env_query_module_eeprom(struct mlxsw_core *mlxsw_core, int module, int status; int err;
+ /* MCIA register accepts buffer size <= 48. Page of size 128 should be + * read by chunks of size 48, 48, 32. Align the size of the last chunk + * to avoid reading after the end of the page. + */ size = min_t(u16, size, MLXSW_REG_MCIA_EEPROM_SIZE);
if (offset < MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH && @@ -63,18 +67,25 @@ mlxsw_env_query_module_eeprom(struct mlxsw_core *mlxsw_core, int module,
i2c_addr = MLXSW_REG_MCIA_I2C_ADDR_LOW; if (offset >= MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH) { - page = MLXSW_REG_MCIA_PAGE_GET(offset); - offset -= MLXSW_REG_MCIA_EEPROM_UP_PAGE_LENGTH * page; - /* When reading upper pages 1, 2 and 3 the offset starts at - * 128. Please refer to "QSFP+ Memory Map" figure in SFF-8436 - * specification for graphical depiction. - * MCIA register accepts buffer size <= 48. Page of size 128 - * should be read by chunks of size 48, 48, 32. Align the size - * of the last chunk to avoid reading after the end of the - * page. - */ - if (offset + size > MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH) - size = MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH - offset; + if (qsfp) { + /* When reading upper pages 1, 2 and 3 the offset + * starts at 128. Please refer to "QSFP+ Memory Map" + * figure in SFF-8436 specification for graphical + * depiction. + */ + page = MLXSW_REG_MCIA_PAGE_GET(offset); + offset -= MLXSW_REG_MCIA_EEPROM_UP_PAGE_LENGTH * page; + if (offset + size > MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH) + size = MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH - offset; + } else { + /* When reading upper pages 1, 2 and 3 the offset + * starts at 0 and I2C high address is used. Please refer + * refer to "Memory Organization" figure in SFF-8472 + * specification for graphical depiction. + */ + i2c_addr = MLXSW_REG_MCIA_I2C_ADDR_HIGH; + offset -= MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH; + } }
mlxsw_reg_mcia_pack(mcia_pl, module, 0, page, offset, size, i2c_addr); @@ -166,7 +177,7 @@ int mlxsw_env_get_module_info(struct mlxsw_core *mlxsw_core, int module, int err;
err = mlxsw_env_query_module_eeprom(mlxsw_core, module, 0, offset, - module_info, &read_size); + module_info, false, &read_size); if (err) return err;
@@ -197,7 +208,7 @@ int mlxsw_env_get_module_info(struct mlxsw_core *mlxsw_core, int module, /* Verify if transceiver provides diagnostic monitoring page */ err = mlxsw_env_query_module_eeprom(mlxsw_core, module, SFP_DIAGMON, 1, &diag_mon, - &read_size); + false, &read_size); if (err) return err;
@@ -225,17 +236,22 @@ int mlxsw_env_get_module_eeprom(struct net_device *netdev, int offset = ee->offset; unsigned int read_size; int i = 0; + bool qsfp; int err;
if (!ee->len) return -EINVAL;
memset(data, 0, ee->len); + /* Validate module identifier value. */ + err = mlxsw_env_validate_cable_ident(mlxsw_core, module, &qsfp); + if (err) + return err;
while (i < ee->len) { err = mlxsw_env_query_module_eeprom(mlxsw_core, module, offset, ee->len - i, data + i, - &read_size); + qsfp, &read_size); if (err) { netdev_err(netdev, "Eeprom query failed\n"); return err;