4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nik Unger njunger@uwaterloo.ca
[ Upstream commit 5080f39e8c72e01cf37e8359023e7018e2a4901e ]
I recently reported on the netem list that iperf network benchmarks show unexpected results when a bandwidth throttling rate has been configured for netem. Specifically:
1) The measured link bandwidth *increases* when a higher delay is added 2) The measured link bandwidth appears higher than the specified limit 3) The measured link bandwidth for the same very slow settings varies significantly across machines
The issue can be reproduced by using tc to configure netem with a 512kbit rate and various (none, 1us, 50ms, 100ms, 200ms) delays on a veth pair between network namespaces, and then using iperf (or any other network benchmarking tool) to test throughput. Complete detailed instructions are in the original email chain here: https://lists.linuxfoundation.org/pipermail/netem/2017-February/001672.html
There appear to be two underlying bugs causing these effects:
- The first issue causes long delays when the rate is slow and no delay is configured (e.g., "rate 512kbit"). This is because SKBs are not orphaned when no delay is configured, so orphaning does not occur until *after* the rate-induced delay has been applied. For this reason, adding a tiny delay (e.g., "rate 512kbit delay 1us") dramatically increases the measured bandwidth.
- The second issue is that rate-induced delays are not correctly applied, allowing SKB delays to occur in parallel. The indended approach is to compute the delay for an SKB and to add this delay to the end of the current queue. However, the code does not detect existing SKBs in the queue due to improperly testing sch->q.qlen, which is nonzero even when packets exist only in the rbtree. Consequently, new SKBs do not wait for the current queue to empty. When packet delays vary significantly (e.g., if packet sizes are different), then this also causes unintended reordering.
I modified the code to expect a delay (and orphan the SKB) when a rate is configured. I also added some defensive tests that correctly find the latest scheduled delivery time, even if it is (unexpectedly) for a packet in sch->q. I have tested these changes on the latest kernel (4.11.0-rc1+) and the iperf / ping test results are as expected.
Signed-off-by: Nik Unger njunger@uwaterloo.ca Signed-off-by: Stephen Hemminger stephen@networkplumber.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/sched/sch_netem.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-)
--- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -462,7 +462,7 @@ static int netem_enqueue(struct sk_buff /* If a delay is expected, orphan the skb. (orphaning usually takes * place at TX completion time, so _before_ the link transit delay) */ - if (q->latency || q->jitter) + if (q->latency || q->jitter || q->rate) skb_orphan_partial(skb);
/* @@ -530,21 +530,31 @@ static int netem_enqueue(struct sk_buff now = psched_get_time();
if (q->rate) { - struct sk_buff *last; + struct netem_skb_cb *last = NULL; + + if (sch->q.tail) + last = netem_skb_cb(sch->q.tail); + if (q->t_root.rb_node) { + struct sk_buff *t_skb; + struct netem_skb_cb *t_last; + + t_skb = netem_rb_to_skb(rb_last(&q->t_root)); + t_last = netem_skb_cb(t_skb); + if (!last || + t_last->time_to_send > last->time_to_send) { + last = t_last; + } + }
- if (sch->q.qlen) - last = sch->q.tail; - else - last = netem_rb_to_skb(rb_last(&q->t_root)); if (last) { /* * Last packet in queue is reference point (now), * calculate this time bonus and subtract * from delay. */ - delay -= netem_skb_cb(last)->time_to_send - now; + delay -= last->time_to_send - now; delay = max_t(psched_tdiff_t, 0, delay); - now = netem_skb_cb(last)->time_to_send; + now = last->time_to_send; }
delay += packet_len_2_sched_time(qdisc_pkt_len(skb), q);