6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Claudiu Beznea claudiu.beznea.uj@bp.renesas.com
commit 5f1017069933489add0c08659673443c9905659e upstream.
The early_console_setup() function initializes sci_ports[0].port with an object of type struct uart_port obtained from the struct earlycon_device passed as an argument to early_console_setup().
Later, during serial port probing, the serial port used as earlycon (e.g., port A) might be remapped to a different position in the sci_ports[] array, and a different serial port (e.g., port B) might be assigned to slot 0. For example:
sci_ports[0] = port B sci_ports[X] = port A
In this scenario, the new port mapped at index zero (port B) retains the data associated with the earlycon configuration. Consequently, after the Linux boot process, any access to the serial port now mapped to sci_ports[0] (port B) will block the original earlycon port (port A).
To address this, introduce an early_console_exit() function to clean up sci_ports[0] when earlycon is exited.
To prevent the cleanup of sci_ports[0] while the serial device is still being used by earlycon, introduce the struct sci_port::probing flag and account for it in early_console_exit().
Fixes: 0b0cced19ab1 ("serial: sh-sci: Add CONFIG_SERIAL_EARLYCON support") Cc: stable@vger.kernel.org Signed-off-by: Claudiu Beznea claudiu.beznea.uj@bp.renesas.com Link: https://lore.kernel.org/r/20250116182249.3828577-5-claudiu.beznea.uj@bp.rene... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Claudiu Beznea claudiu.beznea.uj@bp.renesas.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/sh-sci.c | 32 ++++++++++++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 0071cb3043e14..be7e57e1d1e36 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -183,6 +183,7 @@ static struct sci_port sci_ports[SCI_NPORTS]; static unsigned long sci_ports_in_use; static struct uart_driver sci_uart_driver; static bool sci_uart_earlycon; +static bool sci_uart_earlycon_dev_probing;
static inline struct sci_port * to_sci_port(struct uart_port *uart) @@ -3374,7 +3375,8 @@ static struct plat_sci_port *sci_parse_dt(struct platform_device *pdev, static int sci_probe_single(struct platform_device *dev, unsigned int index, struct plat_sci_port *p, - struct sci_port *sciport) + struct sci_port *sciport, + struct resource *sci_res) { int ret;
@@ -3421,6 +3423,14 @@ static int sci_probe_single(struct platform_device *dev, sciport->port.flags |= UPF_HARD_FLOW; }
+ if (sci_uart_earlycon && sci_ports[0].port.mapbase == sci_res->start) { + /* + * Skip cleanup the sci_port[0] in early_console_exit(), this + * port is the same as the earlycon one. + */ + sci_uart_earlycon_dev_probing = true; + } + return uart_add_one_port(&sci_uart_driver, &sciport->port); }
@@ -3479,7 +3489,7 @@ static int sci_probe(struct platform_device *dev)
platform_set_drvdata(dev, sp);
- ret = sci_probe_single(dev, dev_id, p, sp); + ret = sci_probe_single(dev, dev_id, p, sp, res); if (ret) return ret;
@@ -3636,6 +3646,22 @@ sh_early_platform_init_buffer("earlyprintk", &sci_driver, #ifdef CONFIG_SERIAL_SH_SCI_EARLYCON static struct plat_sci_port port_cfg;
+static int early_console_exit(struct console *co) +{ + struct sci_port *sci_port = &sci_ports[0]; + + /* + * Clean the slot used by earlycon. A new SCI device might + * map to this slot. + */ + if (!sci_uart_earlycon_dev_probing) { + memset(sci_port, 0, sizeof(*sci_port)); + sci_uart_earlycon = false; + } + + return 0; +} + static int __init early_console_setup(struct earlycon_device *device, int type) { @@ -3655,6 +3681,8 @@ static int __init early_console_setup(struct earlycon_device *device, SCSCR_RE | SCSCR_TE | port_cfg.scscr);
device->con->write = serial_console_write; + device->con->exit = early_console_exit; + return 0; } static int __init sci_early_console_setup(struct earlycon_device *device,