From: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com
commit 11bd0ffd165fce7aff1a2ed15c04c088239f3d42 upstream.
When this property was introduced, it contained underscores, but the actual code wants dashes.
Change it from mediatek,rsel_resistance_in_si_unit to mediatek,rsel-resistance-in-si-unit.
Fixes: 91e7edceda96 ("dt-bindings: pinctrl: mt8195: change pull up/down description") Signed-off-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Reviewed-by: Nícolas F. R. A. Prado nfraprado@collabora.com Reviewed-by: Rob Herring robh@kernel.org Link: https://lore.kernel.org/r/20220630122334.216903-1-angelogioacchino.delregno@... Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml @@ -49,7 +49,7 @@ properties: description: The interrupt outputs to sysirq. maxItems: 1
- mediatek,rsel_resistance_in_si_unit: + mediatek,rsel-resistance-in-si-unit: type: boolean description: | Identifying i2c pins pull up/down type which is RSEL. It can support @@ -142,7 +142,7 @@ patternProperties: "MTK_PUPD_SET_R1R0_11" define in mt8195. For pull down type is RSEL, it can add RSEL define & resistance value(ohm) to set different resistance by identifying property - "mediatek,rsel_resistance_in_si_unit". + "mediatek,rsel-resistance-in-si-unit". It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" @@ -161,7 +161,7 @@ patternProperties: }; An example of using si unit resistance value(ohm): &pio { - mediatek,rsel_resistance_in_si_unit; + mediatek,rsel-resistance-in-si-unit; } pincontroller { i2c0_pin { @@ -190,7 +190,7 @@ patternProperties: "MTK_PUPD_SET_R1R0_11" define in mt8195. For pull up type is RSEL, it can add RSEL define & resistance value(ohm) to set different resistance by identifying property - "mediatek,rsel_resistance_in_si_unit". + "mediatek,rsel-resistance-in-si-unit". It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" @@ -209,7 +209,7 @@ patternProperties: }; An example of using si unit resistance value(ohm): &pio { - mediatek,rsel_resistance_in_si_unit; + mediatek,rsel-resistance-in-si-unit; } pincontroller { i2c0-pins {