From: Oliver Neukum oneukum@suse.com
commit 5bef4b3cb95a5b883dfec8b3ffc0d671323d55bb upstream.
This reverts commit 5255660b208aebfdb71d574f3952cf48392f4306.
This quirk breaks at least the following hardware:
0b:00.0 0c03: 1106:3483 (rev 01) (prog-if 30 [XHCI]) Subsystem: 1106:3483 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 66 Region 0: Memory at fb400000 (64-bit, non-prefetchable) [size=4K] Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] MSI: Enable+ Count=1/4 Maskable- 64bit+ Address: 00000000fee007b8 Data: 0000 Capabilities: [c4] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 89W DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <16us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp- LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x1 TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR- 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete- EqualizationPhase1- EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Kernel driver in use: xhci_hcd Kernel modules: xhci_pci
with the quirk enabled it fails early with
[ 0.754373] pci 0000:0b:00.0: xHCI HW did not halt within 32000 usec status = 0x1000 [ 0.754419] pci 0000:0b:00.0: quirk_usb_early_handoff+0x0/0x7a0 took 31459 usecs [ 2.228048] xhci_hcd 0000:0b:00.0: xHCI Host Controller [ 2.228053] xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 7 [ 2.260073] xhci_hcd 0000:0b:00.0: Host halt failed, -110 [ 2.260079] xhci_hcd 0000:0b:00.0: can't setup: -110 [ 2.260551] xhci_hcd 0000:0b:00.0: USB bus 7 deregistered [ 2.260624] xhci_hcd 0000:0b:00.0: init 0000:0b:00.0 fail, -110 [ 2.260639] xhci_hcd: probe of 0000:0b:00.0 failed with error -110
The hardware in question is an external PCIe card. It looks to me like the quirk needs to be narrowed down. But this needs information about the hardware showing the issue this quirk is to fix. So for now a clean revert.
Signed-off-by: Oliver Neukum oneukum@suse.com Fixes: 5255660b208a ("xhci: add quirk for host controllers that don't update endpoint DCS") Cc: stable stable@kernel.org Link: https://lore.kernel.org/r/20230713112830.21773-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci-pci.c | 4 +--- drivers/usb/host/xhci-ring.c | 25 +------------------------ 2 files changed, 2 insertions(+), 27 deletions(-)
--- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -486,10 +486,8 @@ static void xhci_pci_quirks(struct devic pdev->device == 0x3432) xhci->quirks |= XHCI_BROKEN_STREAMS;
- if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) { + if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) xhci->quirks |= XHCI_LPM_SUPPORT; - xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS; - }
if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) { --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -592,11 +592,8 @@ static int xhci_move_dequeue_past_td(str struct xhci_ring *ep_ring; struct xhci_command *cmd; struct xhci_segment *new_seg; - struct xhci_segment *halted_seg = NULL; union xhci_trb *new_deq; int new_cycle; - union xhci_trb *halted_trb; - int index = 0; dma_addr_t addr; u64 hw_dequeue; bool cycle_found = false; @@ -634,27 +631,7 @@ static int xhci_move_dequeue_past_td(str hw_dequeue = xhci_get_hw_deq(xhci, dev, ep_index, stream_id); new_seg = ep_ring->deq_seg; new_deq = ep_ring->dequeue; - - /* - * Quirk: xHC write-back of the DCS field in the hardware dequeue - * pointer is wrong - use the cycle state of the TRB pointed to by - * the dequeue pointer. - */ - if (xhci->quirks & XHCI_EP_CTX_BROKEN_DCS && - !(ep->ep_state & EP_HAS_STREAMS)) - halted_seg = trb_in_td(xhci, td->start_seg, - td->first_trb, td->last_trb, - hw_dequeue & ~0xf, false); - if (halted_seg) { - index = ((dma_addr_t)(hw_dequeue & ~0xf) - halted_seg->dma) / - sizeof(*halted_trb); - halted_trb = &halted_seg->trbs[index]; - new_cycle = halted_trb->generic.field[3] & 0x1; - xhci_dbg(xhci, "Endpoint DCS = %d TRB index = %d cycle = %d\n", - (u8)(hw_dequeue & 0x1), index, new_cycle); - } else { - new_cycle = hw_dequeue & 0x1; - } + new_cycle = hw_dequeue & 0x1;
/* * We want to find the pointer, segment and cycle state of the new trb