From: Pali Rohár pali@kernel.org
commit 1d1cd163d0de22a4041a6f1aeabcf78f80076539 upstream.
According to PCI Express Base Specifications (rev 4.0, 6.6.1 "Conventional reset"), after fundamental reset a 100ms delay is needed prior to enabling link training.
Update comment in code to reflect this requirement.
Link: https://lore.kernel.org/r/20201202184659.3795-1-pali@kernel.org Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Signed-off-by: Marek Behún kabel@kernel.org --- drivers/pci/controller/pci-aardvark.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c index c96343f0235c..f86466563ad9 100644 --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -339,7 +339,14 @@ static void advk_pcie_issue_perst(struct advk_pcie *pcie) if (!pcie->reset_gpio) return;
- /* PERST does not work for some cards when link training is enabled */ + /* + * As required by PCI Express spec (PCI Express Base Specification, REV. + * 4.0 PCI Express, February 19 2014, 6.6.1 Conventional Reset) a delay + * for at least 100ms after de-asserting PERST# signal is needed before + * link training is enabled. So ensure that link training is disabled + * prior de-asserting PERST# signal to fulfill that PCI Express spec + * requirement. + */ reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG); reg &= ~LINK_TRAINING_EN; advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);