6.8-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gaurav Batra gbatra@linux.ibm.com
[ Upstream commit 49a940dbdc3107fecd5e6d3063dc07128177e058 ]
At the time of LPAR boot up, partition firmware provides Open Firmware property ibm,dma-window for the PE. This property is provided on the PCI bus the PE is attached to.
There are execptions where the partition firmware might not provide this property for the PE at the time of LPAR boot up. One of the scenario is where the firmware has frozen the PE due to some error condition. This PE is frozen for 24 hours or unless the whole system is reinitialized.
Within this time frame, if the LPAR is booted, the frozen PE will be presented to the LPAR but ibm,dma-window property could be missing.
Today, under these circumstances, the LPAR oopses with NULL pointer dereference, when configuring the PCI bus the PE is attached to.
BUG: Kernel NULL pointer dereference on read at 0x000000c8 Faulting instruction address: 0xc0000000001024c0 Oops: Kernel access of bad area, sig: 7 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: Supported: Yes CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.4.0-150600.9-default #1 Hardware name: IBM,9043-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_023) hv:phyp pSeries NIP: c0000000001024c0 LR: c0000000001024b0 CTR: c000000000102450 REGS: c0000000037db5c0 TRAP: 0300 Not tainted (6.4.0-150600.9-default) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28000822 XER: 00000000 CFAR: c00000000010254c DAR: 00000000000000c8 DSISR: 00080000 IRQMASK: 0 ... NIP [c0000000001024c0] pci_dma_bus_setup_pSeriesLP+0x70/0x2a0 LR [c0000000001024b0] pci_dma_bus_setup_pSeriesLP+0x60/0x2a0 Call Trace: pci_dma_bus_setup_pSeriesLP+0x60/0x2a0 (unreliable) pcibios_setup_bus_self+0x1c0/0x370 __of_scan_bus+0x2f8/0x330 pcibios_scan_phb+0x280/0x3d0 pcibios_init+0x88/0x12c do_one_initcall+0x60/0x320 kernel_init_freeable+0x344/0x3e4 kernel_init+0x34/0x1d0 ret_from_kernel_user_thread+0x14/0x1c
Fixes: b1fc44eaa9ba ("pseries/iommu/ddw: Fix kdump to work in absence of ibm,dma-window") Signed-off-by: Gaurav Batra gbatra@linux.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://msgid.link/20240422205141.10662-1-gbatra@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/platforms/pseries/iommu.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index e8c4129697b14..b1e6d275cda9e 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -786,8 +786,16 @@ static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus) * parent bus. During reboot, there will be ibm,dma-window property to * define DMA window. For kdump, there will at least be default window or DDW * or both. + * There is an exception to the above. In case the PE goes into frozen + * state, firmware may not provide ibm,dma-window property at the time + * of LPAR boot up. */
+ if (!pdn) { + pr_debug(" no ibm,dma-window property !\n"); + return; + } + ppci = PCI_DN(pdn);
pr_debug(" parent is %pOF, iommu_table: 0x%p\n",