From: Sandeep Singh sandeep.singh@amd.com
commit 2a632815683d2d34df52b701a36fe5ac6654e719 upstream.
On some platform of AMD, S3 fails with HCE and SRE errors. To fix this, need to disable a bit which is enable in sparse controller.
Cc: stable@vger.kernel.org #v4.19+ Signed-off-by: Sanket Goswami Sanket.Goswami@amd.com Signed-off-by: Sandeep Singh sandeep.singh@amd.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20201028203124.375344-3-mathias.nyman@linux.intel.... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/host/xhci-pci.c | 17 +++++++++++++++++ drivers/usb/host/xhci.h | 1 + 2 files changed, 18 insertions(+)
--- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -21,6 +21,8 @@ #define SSIC_PORT_CFG2_OFFSET 0x30 #define PROG_DONE (1 << 30) #define SSIC_PORT_UNUSED (1 << 31) +#define SPARSE_DISABLE_BIT 17 +#define SPARSE_CNTL_ENABLE 0xC12C
/* Device for a quirk */ #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 @@ -149,6 +151,9 @@ static void xhci_pci_quirks(struct devic (pdev->device == 0x15e0 || pdev->device == 0x15e1)) xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND;
+ if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5) + xhci->quirks |= XHCI_DISABLE_SPARSE; + if (pdev->vendor == PCI_VENDOR_ID_AMD) xhci->quirks |= XHCI_TRUST_TX_LENGTH;
@@ -467,6 +472,15 @@ static void xhci_pme_quirk(struct usb_hc readl(reg); }
+static void xhci_sparse_control_quirk(struct usb_hcd *hcd) +{ + u32 reg; + + reg = readl(hcd->regs + SPARSE_CNTL_ENABLE); + reg &= ~BIT(SPARSE_DISABLE_BIT); + writel(reg, hcd->regs + SPARSE_CNTL_ENABLE); +} + static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); @@ -486,6 +500,9 @@ static int xhci_pci_suspend(struct usb_h if (xhci->quirks & XHCI_SSIC_PORT_UNUSED) xhci_ssic_port_unused_quirk(hcd, true);
+ if (xhci->quirks & XHCI_DISABLE_SPARSE) + xhci_sparse_control_quirk(hcd); + ret = xhci_suspend(xhci, do_wakeup); if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED)) xhci_ssic_port_unused_quirk(hcd, false); --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1873,6 +1873,7 @@ struct xhci_hcd { #define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33) #define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34) #define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35) +#define XHCI_DISABLE_SPARSE BIT_ULL(38)
unsigned int num_active_eps; unsigned int limit_active_eps;