From: Fabio Estevam festevam@gmail.com
[ Upstream commit fa51e1dc4b91375bc18349663a52395ad585bd3c ]
On a custom carrier board with a i.MX6Q Apalis SoM, the sgtl5000 codec on the SoM is often not detected and the following error message is seen when the sgtl5000 driver tries to read the ID register:
sgtl5000 1-000a: Error reading chip id -6
The reason for the error is that the MCLK clock is not provided early enough.
Fix the problem by describing the MCLK pinctrl inside the codec node instead of placing it inside the audmux pinctrl group.
With this change applied the sgtl5000 is always detected on every boot.
Fixes: 693e3ffaae5a ("ARM: dts: imx6: Add support for Toradex Apalis iMX6Q/D SoM") Signed-off-by: Fabio Estevam festevam@gmail.com Reviewed-by: Tim Harvey tharvey@gateworks.com Acked-by: Max Krummenacher max.krummenacher@toradex.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/imx6qdl-apalis.dtsi | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 30fa349f9d05..a696873dc1ab 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -286,6 +286,8 @@ vgen6_reg: vgen6 { codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; clocks = <&clks IMX6QDL_CLK_CKO>; VDDA-supply = <®_module_3v3_audio>; VDDIO-supply = <®_module_3v3>; @@ -516,8 +518,6 @@ MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 - /* SGTL5000 sys_mclk */ - MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 >; };
@@ -810,6 +810,12 @@ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0 >; };
+ pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + pinctrl_spdif: spdifgrp { fsl,pins = < MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0