4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede hdegoede@redhat.com
commit 1fdb926974695d3dbc05a429bafa266fdd16510e upstream.
Commit 61f5acea8737 ("Bluetooth: btusb: Restore QCA Rome suspend/resume fix with a "rewritten" version") applied the USB_QUIRK_RESET_RESUME to all QCA USB Bluetooth modules. But it turns out that the resume problems are not caused by the QCA Rome chipset, on most platforms it resumes fine. The resume problems are actually a platform problem (likely the platform cutting all power when suspended).
The USB_QUIRK_RESET_RESUME quirk also disables runtime suspend, so by matching on usb-ids, we're causing all boards with these chips to use extra power, to fix resume problems which only happen on some boards.
This commit fixes this by applying the quirk based on DMI matching instead of on usb-ids, so that we match the platform and not the chipset.
Here is the /sys/kernel/debug/usb/devices for the Bluetooth module:
T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e300 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Fixes: 61f5acea8737 ("Bluetooth: btusb: Restore QCA Rome suspend/resume..") Cc: stable@vger.kernel.org Cc: Brian Norris briannorris@chromium.org Cc: Kai-Heng Feng kai.heng.feng@canonical.com Reported-and-tested-by: Kevin Fenzi kevin@scrye.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/bluetooth/btusb.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-)
--- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -21,6 +21,7 @@ * */
+#include <linux/dmi.h> #include <linux/module.h> #include <linux/usb.h> #include <linux/usb/quirks.h> @@ -376,6 +377,21 @@ static const struct usb_device_id blackl { } /* Terminating entry */ };
+/* The Bluetooth USB module build into some devices needs to be reset on resume, + * this is a problem with the platform (likely shutting off all power) not with + * the module itself. So we use a DMI list to match known broken platforms. + */ +static const struct dmi_system_id btusb_needs_reset_resume_table[] = { + { + /* Lenovo Yoga 920 (QCA Rome device 0cf3:e300) */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 920"), + }, + }, + {} +}; + #define BTUSB_MAX_ISOC_FRAMES 10
#define BTUSB_INTR_RUNNING 0 @@ -3031,6 +3047,9 @@ static int btusb_probe(struct usb_interf hdev->send = btusb_send_frame; hdev->notify = btusb_notify;
+ if (dmi_check_system(btusb_needs_reset_resume_table)) + interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME; + #ifdef CONFIG_PM err = btusb_config_oob_wake(hdev); if (err) @@ -3117,12 +3136,6 @@ static int btusb_probe(struct usb_interf if (id->driver_info & BTUSB_QCA_ROME) { data->setup_on_usb = btusb_setup_qca; hdev->set_bdaddr = btusb_set_bdaddr_ath3012; - - /* QCA Rome devices lose their updated firmware over suspend, - * but the USB hub doesn't notice any status change. - * explicitly request a device reset on resume. - */ - interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME; }
#ifdef CONFIG_BT_HCIBTUSB_RTL