From: Linus Walleij linus.walleij@linaro.org
commit 8a996b2d8a03beae3cb6adfc12673778c192085d upstream.
The Ux500 platforms have some memory carveouts set aside for communicating with the modem and for the initial secure software (ISSW). These areas are protected by the memory controller and will result in an external abort if accessed like common read/write memory.
On the legacy boot loaders, these were set aside by using cmdline arguments such as this:
mem=96M@0 mem_mtrace=15M@96M mem_mshared=1M@111M mem_modem=16M@112M mali.mali_mem=32M@128M mem=96M@160M hwmem=127M@256M mem_issw=1M@383M mem_ram_console=1M@384M mem=638M@385M
Reserve the relevant areas in the device tree instead. The "mali", "hwmem", "mem_ram_console" and the trailing 1MB at the end of the memory reservations in the list are not relevant for the upstream kernel as these are nowadays replaced with upstream technologies such as CMA. The modem and ISSW reservations are necessary.
This was manifested in a bug that surfaced in response to commit 7fef431be9c9 ("mm/page_alloc: place pages to tail in __free_pages_core()") which changes the behaviour of memory allocations in such a way that the platform will sooner run into these dangerous areas, with "Unhandled fault: imprecise external abort (0xc06) at 0xb6fd83dc" or similar: the real reason turns out to be that the PTE is pointing right into one of the reserved memory areas. We were just lucky until now.
We need to augment the DB8500 and DB8520 SoCs similarly and also create a new include for the DB9500 used in the Snowball since this does not have a modem and thus does not need the modem memory reservation, albeit it needs the ISSW reservation.
Signed-off-by: Linus Walleij linus.walleij@linaro.org Cc: stable@vger.kernel.org Cc: David Hildenbrand david@redhat.com Link: https://lore.kernel.org/r/20201213225517.3838501-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/arm/boot/dts/ste-db8500.dtsi | 38 +++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/ste-db8520.dtsi | 38 +++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/ste-db9500.dtsi | 35 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/ste-snowball.dts | 2 - 4 files changed, 112 insertions(+), 1 deletion(-)
--- a/arch/arm/boot/dts/ste-db8500.dtsi +++ b/arch/arm/boot/dts/ste-db8500.dtsi @@ -12,4 +12,42 @@ 200000 0>; }; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Modem trace memory */ + ram@06000000 { + reg = <0x06000000 0x00f00000>; + no-map; + }; + + /* Modem shared memory */ + ram@06f00000 { + reg = <0x06f00000 0x00100000>; + no-map; + }; + + /* Modem private memory */ + ram@07000000 { + reg = <0x07000000 0x01000000>; + no-map; + }; + + /* + * Initial Secure Software ISSW memory + * + * This is probably only used if the kernel tries + * to actually call into trustzone to run secure + * applications, which the mainline kernel probably + * will not do on this old chipset. But you can never + * be too careful, so reserve this memory anyway. + */ + ram@17f00000 { + reg = <0x17f00000 0x00100000>; + no-map; + }; + }; }; --- a/arch/arm/boot/dts/ste-db8520.dtsi +++ b/arch/arm/boot/dts/ste-db8520.dtsi @@ -12,4 +12,42 @@ 200000 0>; }; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Modem trace memory */ + ram@06000000 { + reg = <0x06000000 0x00f00000>; + no-map; + }; + + /* Modem shared memory */ + ram@06f00000 { + reg = <0x06f00000 0x00100000>; + no-map; + }; + + /* Modem private memory */ + ram@07000000 { + reg = <0x07000000 0x01000000>; + no-map; + }; + + /* + * Initial Secure Software ISSW memory + * + * This is probably only used if the kernel tries + * to actually call into trustzone to run secure + * applications, which the mainline kernel probably + * will not do on this old chipset. But you can never + * be too careful, so reserve this memory anyway. + */ + ram@17f00000 { + reg = <0x17f00000 0x00100000>; + no-map; + }; + }; }; --- /dev/null +++ b/arch/arm/boot/dts/ste-db9500.dtsi @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "ste-dbx5x0.dtsi" + +/ { + cpus { + cpu@300 { + /* cpufreq controls */ + operating-points = <1152000 0 + 800000 0 + 400000 0 + 200000 0>; + }; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * Initial Secure Software ISSW memory + * + * This is probably only used if the kernel tries + * to actually call into trustzone to run secure + * applications, which the mainline kernel probably + * will not do on this old chipset. But you can never + * be too careful, so reserve this memory anyway. + */ + ram@17f00000 { + reg = <0x17f00000 0x00100000>; + no-map; + }; + }; +}; --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -4,7 +4,7 @@ */
/dts-v1/; -#include "ste-db8500.dtsi" +#include "ste-db9500.dtsi" #include "ste-href-ab8500.dtsi" #include "ste-href-family-pinctrl.dtsi"