This is a note to let you know that I've just added the patch titled
counter: stm32-timer-cnt: fix ceiling miss-alignment with reload
to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-linus branch.
The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.
If you have any questions about this process, please let me know.
From b14d72ac731753708a7c1a6b3657b9312b6f0042 Mon Sep 17 00:00:00 2001
From: Fabrice Gasnier fabrice.gasnier@foss.st.com Date: Wed, 3 Mar 2021 18:49:49 +0100 Subject: counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
Ceiling value may be miss-aligned with what's actually configured into the ARR register. This is seen after probe as currently the ARR value is zero, whereas ceiling value is set to the maximum. So: - reading ceiling reports zero - in case the counter gets enabled without any prior configuration, it won't count. - in case the function gets set by the user 1st, (priv->ceiling) is used.
Fix it by getting rid of the cached "priv->ceiling" variable. Rather use the ARR register value directly by using regmap read or write when needed. There should be no drawback on performance as priv->ceiling isn't used in performance critical path. There's also no point in writing ARR while setting function (sms), so it can be safely removed.
Fixes: ad29937e206f ("counter: Add STM32 Timer quadrature encoder") Suggested-by: William Breathitt Gray vilhelm.gray@gmail.com Signed-off-by: Fabrice Gasnier fabrice.gasnier@foss.st.com Acked-by: William Breathitt Gray vilhelm.gray@gmail.com Cc: Stable@vger.kernel.org Link: https://lore.kernel.org/r/1614793789-10346-1-git-send-email-fabrice.gasnier@... Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com --- drivers/counter/stm32-timer-cnt.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/counter/stm32-timer-cnt.c b/drivers/counter/stm32-timer-cnt.c index 2295be3f309a..75bc401fdd18 100644 --- a/drivers/counter/stm32-timer-cnt.c +++ b/drivers/counter/stm32-timer-cnt.c @@ -31,7 +31,6 @@ struct stm32_timer_cnt { struct counter_device counter; struct regmap *regmap; struct clk *clk; - u32 ceiling; u32 max_arr; bool enabled; struct stm32_timer_regs bak; @@ -75,8 +74,10 @@ static int stm32_count_write(struct counter_device *counter, const unsigned long val) { struct stm32_timer_cnt *const priv = counter->priv; + u32 ceiling;
- if (val > priv->ceiling) + regmap_read(priv->regmap, TIM_ARR, &ceiling); + if (val > ceiling) return -EINVAL;
return regmap_write(priv->regmap, TIM_CNT, val); @@ -138,10 +139,6 @@ static int stm32_count_function_set(struct counter_device *counter,
regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0);
- /* TIMx_ARR register shouldn't be buffered (ARPE=0) */ - regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0); - regmap_write(priv->regmap, TIM_ARR, priv->ceiling); - regmap_update_bits(priv->regmap, TIM_SMCR, TIM_SMCR_SMS, sms);
/* Make sure that registers are updated */ @@ -199,7 +196,6 @@ static ssize_t stm32_count_ceiling_write(struct counter_device *counter, regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0); regmap_write(priv->regmap, TIM_ARR, ceiling);
- priv->ceiling = ceiling; return len; }
@@ -374,7 +370,6 @@ static int stm32_timer_cnt_probe(struct platform_device *pdev)
priv->regmap = ddata->regmap; priv->clk = ddata->clk; - priv->ceiling = ddata->max_arr; priv->max_arr = ddata->max_arr;
priv->counter.name = dev_name(dev);