From: Niklas Schnelle schnelle@linux.ibm.com
commit f058599e22d59e594e5aae1dc10560568d8f4a8b upstream.
The s390_mmio_read/write syscalls are currently broken when running with MIO.
The new pcistb_mio/pcstg_mio/pcilg_mio instructions are executed similiarly to normal load/store instructions and do address translation in the current address space. That means inside the kernel they are aware of mappings into kernel address space while outside the kernel they use user space mappings (usually created through mmap'ing a PCI device file).
Now when existing user space applications use the s390_pci_mmio_write and s390_pci_mmio_read syscalls, they pass I/O addresses that are mapped into user space so as to be usable with the new instructions without needing a syscall. Accessing these addresses with the old instructions as done currently leads to a kernel panic.
Also, for such a user space mapping there may not exist an equivalent kernel space mapping which means we can't just use the new instructions in kernel space.
Instead of replicating user mappings in the kernel which then might collide with other mappings, we can conceptually execute the new instructions as if executed by the user space application using the secondary address space. This even allows us to directly store to the user pointer without the need for copy_to/from_user().
Cc: stable@vger.kernel.org Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") Signed-off-by: Niklas Schnelle schnelle@linux.ibm.com Reviewed-by: Sven Schnelle svens@linux.ibm.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/s390/include/asm/pci_io.h | 10 + arch/s390/pci/pci_mmio.c | 213 ++++++++++++++++++++++++++++++++++++++++- 2 files changed, 219 insertions(+), 4 deletions(-)
--- a/arch/s390/include/asm/pci_io.h +++ b/arch/s390/include/asm/pci_io.h @@ -8,6 +8,10 @@ #include <linux/slab.h> #include <asm/pci_insn.h>
+/* I/O size constraints */ +#define ZPCI_MAX_READ_SIZE 8 +#define ZPCI_MAX_WRITE_SIZE 128 + /* I/O Map */ #define ZPCI_IOMAP_SHIFT 48 #define ZPCI_IOMAP_ADDR_BASE 0x8000000000000000UL @@ -140,7 +144,8 @@ static inline int zpci_memcpy_fromio(voi
while (n > 0) { size = zpci_get_max_write_size((u64 __force) src, - (u64) dst, n, 8); + (u64) dst, n, + ZPCI_MAX_READ_SIZE); rc = zpci_read_single(dst, src, size); if (rc) break; @@ -161,7 +166,8 @@ static inline int zpci_memcpy_toio(volat
while (n > 0) { size = zpci_get_max_write_size((u64 __force) dst, - (u64) src, n, 128); + (u64) src, n, + ZPCI_MAX_WRITE_SIZE); if (size > 8) /* main path */ rc = zpci_write_block(dst, src, size); else --- a/arch/s390/pci/pci_mmio.c +++ b/arch/s390/pci/pci_mmio.c @@ -11,6 +11,113 @@ #include <linux/mm.h> #include <linux/errno.h> #include <linux/pci.h> +#include <asm/pci_io.h> +#include <asm/pci_debug.h> + +static inline void zpci_err_mmio(u8 cc, u8 status, u64 offset) +{ + struct { + u64 offset; + u8 cc; + u8 status; + } data = {offset, cc, status}; + + zpci_err_hex(&data, sizeof(data)); +} + +static inline int __pcistb_mio_inuser( + void __iomem *ioaddr, const void __user *src, + u64 len, u8 *status) +{ + int cc = -ENXIO; + + asm volatile ( + " sacf 256\n" + "0: .insn rsy,0xeb00000000d4,%[len],%[ioaddr],%[src]\n" + "1: ipm %[cc]\n" + " srl %[cc],28\n" + "2: sacf 768\n" + EX_TABLE(0b, 2b) EX_TABLE(1b, 2b) + : [cc] "+d" (cc), [len] "+d" (len) + : [ioaddr] "a" (ioaddr), [src] "Q" (*((u8 __force *)src)) + : "cc", "memory"); + *status = len >> 24 & 0xff; + return cc; +} + +static inline int __pcistg_mio_inuser( + void __iomem *ioaddr, const void __user *src, + u64 ulen, u8 *status) +{ + register u64 addr asm("2") = (u64 __force) ioaddr; + register u64 len asm("3") = ulen; + int cc = -ENXIO; + u64 val = 0; + u64 cnt = ulen; + u8 tmp; + + /* + * copy 0 < @len <= 8 bytes from @src into the right most bytes of + * a register, then store it to PCI at @ioaddr while in secondary + * address space. pcistg then uses the user mappings. + */ + asm volatile ( + " sacf 256\n" + "0: llgc %[tmp],0(%[src])\n" + " sllg %[val],%[val],8\n" + " aghi %[src],1\n" + " ogr %[val],%[tmp]\n" + " brctg %[cnt],0b\n" + "1: .insn rre,0xb9d40000,%[val],%[ioaddr]\n" + "2: ipm %[cc]\n" + " srl %[cc],28\n" + "3: sacf 768\n" + EX_TABLE(0b, 3b) EX_TABLE(1b, 3b) EX_TABLE(2b, 3b) + : + [src] "+a" (src), [cnt] "+d" (cnt), + [val] "+d" (val), [tmp] "=d" (tmp), + [len] "+d" (len), [cc] "+d" (cc), + [ioaddr] "+a" (addr) + :: "cc", "memory"); + *status = len >> 24 & 0xff; + + /* did we read everything from user memory? */ + if (!cc && cnt != 0) + cc = -EFAULT; + + return cc; +} + +static inline int __memcpy_toio_inuser(void __iomem *dst, + const void __user *src, size_t n) +{ + int size, rc = 0; + u8 status = 0; + mm_segment_t old_fs; + + if (!src) + return -EINVAL; + + old_fs = enable_sacf_uaccess(); + while (n > 0) { + size = zpci_get_max_write_size((u64 __force) dst, + (u64 __force) src, n, + ZPCI_MAX_WRITE_SIZE); + if (size > 8) /* main path */ + rc = __pcistb_mio_inuser(dst, src, size, &status); + else + rc = __pcistg_mio_inuser(dst, src, size, &status); + if (rc) + break; + src += size; + dst += size; + n -= size; + } + disable_sacf_uaccess(old_fs); + if (rc) + zpci_err_mmio(rc, status, (__force u64) dst); + return rc; +}
static long get_pfn(unsigned long user_addr, unsigned long access, unsigned long *pfn) @@ -46,6 +153,20 @@ SYSCALL_DEFINE3(s390_pci_mmio_write, uns
if (length <= 0 || PAGE_SIZE - (mmio_addr & ~PAGE_MASK) < length) return -EINVAL; + + /* + * Only support read access to MIO capable devices on a MIO enabled + * system. Otherwise we would have to check for every address if it is + * a special ZPCI_ADDR and we would have to do a get_pfn() which we + * don't need for MIO capable devices. + */ + if (static_branch_likely(&have_mio)) { + ret = __memcpy_toio_inuser((void __iomem *) mmio_addr, + user_buffer, + length); + return ret; + } + if (length > 64) { buf = kmalloc(length, GFP_KERNEL); if (!buf) @@ -56,7 +177,8 @@ SYSCALL_DEFINE3(s390_pci_mmio_write, uns ret = get_pfn(mmio_addr, VM_WRITE, &pfn); if (ret) goto out; - io_addr = (void __iomem *)((pfn << PAGE_SHIFT) | (mmio_addr & ~PAGE_MASK)); + io_addr = (void __iomem *)((pfn << PAGE_SHIFT) | + (mmio_addr & ~PAGE_MASK));
ret = -EFAULT; if ((unsigned long) io_addr < ZPCI_IOMAP_ADDR_BASE) @@ -72,6 +194,78 @@ out: return ret; }
+static inline int __pcilg_mio_inuser( + void __user *dst, const void __iomem *ioaddr, + u64 ulen, u8 *status) +{ + register u64 addr asm("2") = (u64 __force) ioaddr; + register u64 len asm("3") = ulen; + u64 cnt = ulen; + int shift = ulen * 8; + int cc = -ENXIO; + u64 val, tmp; + + /* + * read 0 < @len <= 8 bytes from the PCI memory mapped at @ioaddr (in + * user space) into a register using pcilg then store these bytes at + * user address @dst + */ + asm volatile ( + " sacf 256\n" + "0: .insn rre,0xb9d60000,%[val],%[ioaddr]\n" + "1: ipm %[cc]\n" + " srl %[cc],28\n" + " ltr %[cc],%[cc]\n" + " jne 4f\n" + "2: ahi %[shift],-8\n" + " srlg %[tmp],%[val],0(%[shift])\n" + "3: stc %[tmp],0(%[dst])\n" + " aghi %[dst],1\n" + " brctg %[cnt],2b\n" + "4: sacf 768\n" + EX_TABLE(0b, 4b) EX_TABLE(1b, 4b) EX_TABLE(3b, 4b) + : + [cc] "+d" (cc), [val] "=d" (val), [len] "+d" (len), + [dst] "+a" (dst), [cnt] "+d" (cnt), [tmp] "=d" (tmp), + [shift] "+d" (shift) + : + [ioaddr] "a" (addr) + : "cc", "memory"); + + /* did we write everything to the user space buffer? */ + if (!cc && cnt != 0) + cc = -EFAULT; + + *status = len >> 24 & 0xff; + return cc; +} + +static inline int __memcpy_fromio_inuser(void __user *dst, + const void __iomem *src, + unsigned long n) +{ + int size, rc = 0; + u8 status; + mm_segment_t old_fs; + + old_fs = enable_sacf_uaccess(); + while (n > 0) { + size = zpci_get_max_write_size((u64 __force) src, + (u64 __force) dst, n, + ZPCI_MAX_READ_SIZE); + rc = __pcilg_mio_inuser(dst, src, size, &status); + if (rc) + break; + src += size; + dst += size; + n -= size; + } + disable_sacf_uaccess(old_fs); + if (rc) + zpci_err_mmio(rc, status, (__force u64) dst); + return rc; +} + SYSCALL_DEFINE3(s390_pci_mmio_read, unsigned long, mmio_addr, void __user *, user_buffer, size_t, length) { @@ -86,12 +280,27 @@ SYSCALL_DEFINE3(s390_pci_mmio_read, unsi
if (length <= 0 || PAGE_SIZE - (mmio_addr & ~PAGE_MASK) < length) return -EINVAL; + + /* + * Only support write access to MIO capable devices on a MIO enabled + * system. Otherwise we would have to check for every address if it is + * a special ZPCI_ADDR and we would have to do a get_pfn() which we + * don't need for MIO capable devices. + */ + if (static_branch_likely(&have_mio)) { + ret = __memcpy_fromio_inuser( + user_buffer, (const void __iomem *)mmio_addr, + length); + return ret; + } + if (length > 64) { buf = kmalloc(length, GFP_KERNEL); if (!buf) return -ENOMEM; - } else + } else { buf = local_buf; + }
ret = get_pfn(mmio_addr, VM_READ, &pfn); if (ret)