On 6/28/20 10:52 AM, Hans de Goede wrote:
The default mode for SSP configuration is TDM 4 slot and so far we were using this for the bus format on cht-bsw-rt56732 boards.
One board, the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2. The second piggy-backed, output-only codec is inside the keyboard-dock (which has extra speakers). Unlike the main rt5672 codec, we cannot configure this codec, it is hard coded to use 2 channel 24 bit I2S.
Using 4 channel TDM leads to the dock speakers codec (which listens in on the data send from the SSP to the rt5672 codec) emiting horribly distorted sound.
Since we only support 2 channels anyways, there is no need for TDM on any cht-bsw-rt5672 designs. So we can simply use I2S 2ch everywhere.
This commit fixes the Lenovo Miix 2 10 dock speakers issue by changing the bus format set in cht_codec_fixup() to I2S 2 channel.
This change has been tested on the following devices with a rt5672 codec:
Lenovo Miix 2 10 Lenovo Thinkpad 8 Lenovo Thinkpad 10 (gen 1)
Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1786723 Signed-off-by: Hans de Goede hdegoede@redhat.com
sound/soc/intel/boards/cht_bsw_rt5672.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-)
diff --git a/sound/soc/intel/boards/cht_bsw_rt5672.c b/sound/soc/intel/boards/cht_bsw_rt5672.c index 7a43c70a1378..22e432768edb 100644 --- a/sound/soc/intel/boards/cht_bsw_rt5672.c +++ b/sound/soc/intel/boards/cht_bsw_rt5672.c @@ -253,21 +253,20 @@ static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd, params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); /*
* Default mode for SSP configuration is TDM 4 slot
* Default mode for SSP configuration is TDM 4 slot. One board/design,* the Lenovo Miix 2 10 uses not 1 but 2 codecs connected to SSP2. The* second piggy-backed, output-only codec is inside the keyboard-dock* (which has extra speakers). Unlike the main rt5672 codec, we cannot* configure this codec, it is hard coded to use 2 channel 24 bit I2S.* Since we only support 2 channels anyways, there is no need for TDM* on any cht-bsw-rt5672 designs. So we simply use I2S 2ch everywhere.
The change looks fine, but you may want to add additional comments to explain what happens here.
The default mode for the SSP configuration is TDM 4 slot for the cpu-dai (hard-coded in DSP firmware) the default mode for the SSP configuration is I2S for the codec-dai (hard-coded in the 'SSP2-Codec" .dai_fmt masks, so far unused).
So with this change, you trade one dynamic configuration for another (was codec, not cpu). It works because of the pre-existing hard-coded values for the parts that are not set in this function.
- ret = snd_soc_dai_set_fmt(asoc_rtd_to_codec(rtd, 0),
SND_SOC_DAIFMT_DSP_B |SND_SOC_DAIFMT_IB_NF |
- ret = snd_soc_dai_set_fmt(asoc_rtd_to_cpu(rtd, 0),
SND_SOC_DAIFMT_I2S |SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
dev_err(rtd->dev, "can't set format to TDM %d\n", ret);return ret;- }
- /* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */
- ret = snd_soc_dai_set_tdm_slot(asoc_rtd_to_codec(rtd, 0), 0xF, 0xF, 4, 24);
- if (ret < 0) {
dev_err(rtd->dev, "can't set codec TDM slot %d\n", ret);
dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret); > return ret;