From: Zhu Yanjun yanjunz@mellanox.com
commit dcdf4ce0ff4ba206fc362e149c8ae81d6a2f849c upstream.
In the switchdev mode, when running "cat /sys/class/net/NIC/statistics/tx_packets", the ppcnt register is accessed to get the latest values. But currently this command can not get the correct values from ppcnt.
From firmware manual, before getting the 802_3 counters, the 802_3
data layout should be set to the ppcnt register.
When the command "cat /sys/class/net/NIC/statistics/tx_packets" is run, before updating 802_3 data layout with ppcnt register, the monitor counters are tested. The test result will decide the 802_3 data layout is updated or not.
Actually the monitor counters do not support to monitor rx/tx stats of 802_3 in switchdev mode. So the rx/tx counters change will not trigger monitor counters. So the 802_3 data layout will not be updated in ppcnt register. Finally this command can not get the latest values from ppcnt register with 802_3 data layout.
Fixes: 5c7e8bbb0257 ("net/mlx5e: Use monitor counters for update stats") Signed-off-by: Zhu Yanjun yanjunz@mellanox.com Signed-off-by: Saeed Mahameed saeedm@mellanox.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -3579,7 +3579,12 @@ mlx5e_get_stats(struct net_device *dev, struct mlx5e_vport_stats *vstats = &priv->stats.vport; struct mlx5e_pport_stats *pstats = &priv->stats.pport;
- if (!mlx5e_monitor_counter_supported(priv)) { + /* In switchdev mode, monitor counters doesn't monitor + * rx/tx stats of 802_3. The update stats mechanism + * should keep the 802_3 layout counters updated + */ + if (!mlx5e_monitor_counter_supported(priv) || + mlx5e_is_uplink_rep(priv)) { /* update HW stats in background for next time */ mlx5e_queue_update_stats(priv); }