From: Olof Johansson olof@lixom.net
[ Upstream commit 33bf5519ae5dd356b182a94e3622f42860274a38 ]
PAGE_READ is used by RISC-V arch code included through mm headers, and it makes sense to bring in a prefix on these in the driver.
drivers/mtd/nand/raw/qcom_nandc.c:153: warning: "PAGE_READ" redefined #define PAGE_READ 0x2 In file included from include/linux/memremap.h:7, from include/linux/mm.h:27, from include/linux/scatterlist.h:8, from include/linux/dma-mapping.h:11, from drivers/mtd/nand/raw/qcom_nandc.c:17: arch/riscv/include/asm/pgtable.h:48: note: this is the location of the previous definition
Caught by riscv allmodconfig.
Signed-off-by: Olof Johansson olof@lixom.net Reviewed-by: Miquel Raynal miquel.raynal@bootlin.com Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mtd/nand/qcom_nandc.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/mtd/nand/qcom_nandc.c b/drivers/mtd/nand/qcom_nandc.c index dc4943134649..9f6c9a34b9eb 100644 --- a/drivers/mtd/nand/qcom_nandc.c +++ b/drivers/mtd/nand/qcom_nandc.c @@ -142,15 +142,15 @@ #define NAND_VERSION_MINOR_SHIFT 16
/* NAND OP_CMDs */ -#define PAGE_READ 0x2 -#define PAGE_READ_WITH_ECC 0x3 -#define PAGE_READ_WITH_ECC_SPARE 0x4 -#define PROGRAM_PAGE 0x6 -#define PAGE_PROGRAM_WITH_ECC 0x7 -#define PROGRAM_PAGE_SPARE 0x9 -#define BLOCK_ERASE 0xa -#define FETCH_ID 0xb -#define RESET_DEVICE 0xd +#define OP_PAGE_READ 0x2 +#define OP_PAGE_READ_WITH_ECC 0x3 +#define OP_PAGE_READ_WITH_ECC_SPARE 0x4 +#define OP_PROGRAM_PAGE 0x6 +#define OP_PAGE_PROGRAM_WITH_ECC 0x7 +#define OP_PROGRAM_PAGE_SPARE 0x9 +#define OP_BLOCK_ERASE 0xa +#define OP_FETCH_ID 0xb +#define OP_RESET_DEVICE 0xd
/* Default Value for NAND_DEV_CMD_VLD */ #define NAND_DEV_CMD_VLD_VAL (READ_START_VLD | WRITE_START_VLD | \ @@ -425,11 +425,11 @@ static void update_rw_regs(struct qcom_nand_host *host, int num_cw, bool read)
if (read) { if (host->use_ecc) - cmd = PAGE_READ_WITH_ECC | PAGE_ACC | LAST_PAGE; + cmd = OP_PAGE_READ_WITH_ECC | PAGE_ACC | LAST_PAGE; else - cmd = PAGE_READ | PAGE_ACC | LAST_PAGE; + cmd = OP_PAGE_READ | PAGE_ACC | LAST_PAGE; } else { - cmd = PROGRAM_PAGE | PAGE_ACC | LAST_PAGE; + cmd = OP_PROGRAM_PAGE | PAGE_ACC | LAST_PAGE; }
if (host->use_ecc) { @@ -662,7 +662,7 @@ static int nandc_param(struct qcom_nand_host *host) * in use. we configure the controller to perform a raw read of 512 * bytes to read onfi params */ - nandc_set_reg(nandc, NAND_FLASH_CMD, PAGE_READ | PAGE_ACC | LAST_PAGE); + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_PAGE_READ | PAGE_ACC | LAST_PAGE); nandc_set_reg(nandc, NAND_ADDR0, 0); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_DEV0_CFG0, 0 << CW_PER_PAGE @@ -715,7 +715,7 @@ static int erase_block(struct qcom_nand_host *host, int page_addr) struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
nandc_set_reg(nandc, NAND_FLASH_CMD, - BLOCK_ERASE | PAGE_ACC | LAST_PAGE); + OP_BLOCK_ERASE | PAGE_ACC | LAST_PAGE); nandc_set_reg(nandc, NAND_ADDR0, page_addr); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_DEV0_CFG0, @@ -746,7 +746,7 @@ static int read_id(struct qcom_nand_host *host, int column) if (column == -1) return 0;
- nandc_set_reg(nandc, NAND_FLASH_CMD, FETCH_ID); + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_FETCH_ID); nandc_set_reg(nandc, NAND_ADDR0, column); nandc_set_reg(nandc, NAND_ADDR1, 0); nandc_set_reg(nandc, NAND_FLASH_CHIP_SELECT, DM_EN); @@ -766,7 +766,7 @@ static int reset(struct qcom_nand_host *host) struct nand_chip *chip = &host->chip; struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
- nandc_set_reg(nandc, NAND_FLASH_CMD, RESET_DEVICE); + nandc_set_reg(nandc, NAND_FLASH_CMD, OP_RESET_DEVICE); nandc_set_reg(nandc, NAND_EXEC_CMD, 1);
write_reg_dma(nandc, NAND_FLASH_CMD, 1);