6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cristian Birsan cristian.birsan@microchip.com
[ Upstream commit 4d9e5965df04c0adf260c3009c55d5fe240f7286 ]
Add no-1-8-v property to sdmmc0 node to keep VDDSDMMC power rail at 3.3V. This property will stop the LDO regulator from switching to 1.8V when the MMC core detects an UHS SD Card. VDDSDMMC power rail is used by all the SDMMC interface pins in GPIO mode (PA0 - PA13).
On this board, PA10 is used as GPIO to enable the power switch controlling USB Vbus for the USB Host. The change is needed to fix the PA10 voltage level to 3.3V instead of 1.8V.
Fixes: 5d4c3cfb63fe ("ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek") Suggested-by: Mihai Sain mihai.sain@microchip.com Signed-off-by: Cristian Birsan cristian.birsan@microchip.com Tested-by: Andrei Simion andrei.simion@microchip.com Link: https://lore.kernel.org/r/20241119160107.598411-3-cristian.birsan@microchip.... Signed-off-by: Claudiu Beznea claudiu.beznea@tuxon.dev Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts index 15239834d886e..35a933eec5738 100644 --- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts @@ -197,6 +197,7 @@
&sdmmc0 { bus-width = <4>; + no-1-8-v; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdmmc0_default>; status = "okay";