This is a note to let you know that I've just added the patch titled
iio/gyro/bmg160: Use millidegrees for temperature scale
to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-linus branch.
The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.
If you have any questions about this process, please let me know.
From 40a7198a4a01037003c7ca714f0d048a61e729ac Mon Sep 17 00:00:00 2001
From: Mike Looijmans mike.looijmans@topic.nl Date: Wed, 13 Feb 2019 08:41:47 +0100 Subject: iio/gyro/bmg160: Use millidegrees for temperature scale
Standard unit for temperature is millidegrees Celcius, whereas this driver was reporting in degrees. Fix the scale factor in the driver.
Signed-off-by: Mike Looijmans mike.looijmans@topic.nl Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com --- drivers/iio/gyro/bmg160_core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/gyro/bmg160_core.c b/drivers/iio/gyro/bmg160_core.c index 63ca31628a93..92c07ab826eb 100644 --- a/drivers/iio/gyro/bmg160_core.c +++ b/drivers/iio/gyro/bmg160_core.c @@ -582,11 +582,10 @@ static int bmg160_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: return bmg160_get_filter(data, val); case IIO_CHAN_INFO_SCALE: - *val = 0; switch (chan->type) { case IIO_TEMP: - *val2 = 500000; - return IIO_VAL_INT_PLUS_MICRO; + *val = 500; + return IIO_VAL_INT; case IIO_ANGL_VEL: { int i; @@ -594,6 +593,7 @@ static int bmg160_read_raw(struct iio_dev *indio_dev, for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) { if (bmg160_scale_table[i].dps_range == data->dps_range) { + *val = 0; *val2 = bmg160_scale_table[i].scale; return IIO_VAL_INT_PLUS_MICRO; }