From: Aleksander Jan Bajkowski olek2@wp.pl
[ Upstream commit 5ca9ce2ba4d5884cd94d1a856c675ab1242cd242 ]
Different SoCs have a different number of channels, e.g .: * amazon-se has 10 channels, * danube+ar9 have 20 channels, * vr9 has 28 channels, * ar10 has 24 channels.
We can read the ID register and, depending on the reported number of channels, reset the appropriate number of channels.
Signed-off-by: Aleksander Jan Bajkowski olek2@wp.pl Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/lantiq/xway/dma.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c index 45a622b72cd13..efee1c538a518 100644 --- a/arch/mips/lantiq/xway/dma.c +++ b/arch/mips/lantiq/xway/dma.c @@ -41,6 +41,7 @@ #define LTQ_DMA_PCTRL 0x44 #define LTQ_DMA_IRNEN 0xf4
+#define DMA_ID_CHNR GENMASK(26, 20) /* channel number */ #define DMA_DESCPT BIT(3) /* descriptor complete irq */ #define DMA_TX BIT(8) /* TX channel direction */ #define DMA_CHAN_ON BIT(0) /* channel on / off bit */ @@ -51,7 +52,6 @@ #define DMA_POLL BIT(31) /* turn on channel polling */ #define DMA_CLK_DIV4 BIT(6) /* polling clock divider */ #define DMA_2W_BURST BIT(1) /* 2 word burst length */ -#define DMA_MAX_CHANNEL 20 /* the soc has 20 channels */ #define DMA_ETOP_ENDIANNESS (0xf << 8) /* endianness swap etop channels */ #define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */
@@ -218,7 +218,7 @@ ltq_dma_init(struct platform_device *pdev) { struct clk *clk; struct resource *res; - unsigned id; + unsigned int id, nchannels; int i;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -240,17 +240,18 @@ ltq_dma_init(struct platform_device *pdev) ltq_dma_w32(0, LTQ_DMA_IRNEN);
/* reset/configure each channel */ - for (i = 0; i < DMA_MAX_CHANNEL; i++) { + id = ltq_dma_r32(LTQ_DMA_ID); + nchannels = ((id & DMA_ID_CHNR) >> 20); + for (i = 0; i < nchannels; i++) { ltq_dma_w32(i, LTQ_DMA_CS); ltq_dma_w32(DMA_CHAN_RST, LTQ_DMA_CCTRL); ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL); ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL); }
- id = ltq_dma_r32(LTQ_DMA_ID); dev_info(&pdev->dev, "Init done - hw rev: %X, ports: %d, channels: %d\n", - id & 0x1f, (id >> 16) & 0xf, id >> 20); + id & 0x1f, (id >> 16) & 0xf, nchannels);
return 0; }