On Monday, February 18, 2019 2:44:08 PM CET Greg Kroah-Hartman wrote:
4.14-stable review patch. If anyone has any objections, please let me know.
Wait! There's a problem! This patch "alone" is not enough to fix "the gpio-hog kills system" bug. The series also included the necessary dts change:
"[v6,2/2] ARM: dts: qcom: add gpio-ranges property" https://patchwork.kernel.org/patch/10432105/
This patch is still set to "Awaiting upstream". But, from what I can tell "linux-arm-msm" is the upstream, right?
Anyway we had this discussion before: https://www.spinics.net/lists/stable-commits/msg95383.html But I don't have a long enough "poking tool" you speak of to do anything about it.
So @Amit / @greg : can you please poke Andy about it?
Note 2: The series also included a dt-binding patch: "[v6,1/2] dt-bindings: pinctrl: qcom: add gpio-ranges, gpio-reserved-ranges" https://patchwork.kernel.org/patch/10431593/
which made its way (with the same changes as the 2/2 patch) upstream. commit c1e802f68ca0 ("dt-bindings: pinctrl: qcom: add gpio-ranges, gpio-reserved-ranges")
Cheers, Christian
From: Christian Lamparter chunkeey@gmail.com
commit a86caa9ba5d70696ceb35d1d39caa20d8b641387 upstream.
Sven Eckelmann reported an issue with the current IPQ4019 pinctrl. Setting up any gpio-hog in the device-tree for his device would "kill the bootup completely":
| [ 0.477838] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe | [ 0.499828] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferring probe | [ 1.298883] requesting hog GPIO enable USB2 power (chip 1000000.pinctrl, offset 58) failed, -517 | [ 1.299609] gpiochip_add_data: GPIOs 0..99 (1000000.pinctrl) failed to register | [ 1.308589] ipq4019-pinctrl 1000000.pinctrl: Failed register gpiochip | [ 1.316586] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe | [ 1.322415] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferri
This was also verified on a RT-AC58U (IPQ4018) which would no longer boot, if a gpio-hog was specified. (Tried forcing the USB LED PIN (GPIO0) to high.).
The problem is that Pinctrl+GPIO registration is currently peformed in the following order in pinctrl-msm.c:
- pinctrl_register()
- gpiochip_add()
- gpiochip_add_pin_range()
The actual error code -517 == -EPROBE_DEFER is coming from pinctrl_get_device_gpio_range(), which is called through: gpiochip_add of_gpiochip_add of_gpiochip_scan_gpios gpiod_hog gpiochip_request_own_desc __gpiod_request chip->request gpiochip_generic_request pinctrl_gpio_request pinctrl_get_device_gpio_range
pinctrl_get_device_gpio_range() is unable to find any valid pin ranges, since nothing has been added to the pinctrldev_list yet. so the range can't be found, and the operation fails with -EPROBE_DEFER.
This patch fixes the issue by adding the "gpio-ranges" property to the pinctrl device node of all upstream Qcom SoC. The pin ranges are then added by the gpio core.
In order to remain compatible with older, existing DTs (and ACPI) a check for the "gpio-ranges" property has been added to msm_gpio_init(). This prevents the driver of adding the same entry to the pinctrldev_list twice.
Reported-by: Sven Eckelmann sven.eckelmann@openmesh.com Tested-by: Sven Eckelmann sven.eckelmann@openmesh.com [ipq4019] Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Christian Lamparter chunkeey@gmail.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Amit Pundir amit.pundir@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
drivers/pinctrl/qcom/pinctrl-msm.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-)
--- a/drivers/pinctrl/qcom/pinctrl-msm.c +++ b/drivers/pinctrl/qcom/pinctrl-msm.c @@ -839,11 +839,24 @@ static int msm_gpio_init(struct msm_pinc return ret; }
- ret = gpiochip_add_pin_range(&pctrl->chip, dev_name(pctrl->dev), 0, 0, chip->ngpio);
- if (ret) {
dev_err(pctrl->dev, "Failed to add pin range\n");gpiochip_remove(&pctrl->chip);return ret;
- /*
* For DeviceTree-supported systems, the gpio core checks the* pinctrl's device node for the "gpio-ranges" property.* If it is present, it takes care of adding the pin ranges* for the driver. In this case the driver can skip ahead.** In order to remain compatible with older, existing DeviceTree* files which don't set the "gpio-ranges" property or systems that* utilize ACPI the driver has to call gpiochip_add_pin_range().*/- if (!of_property_read_bool(pctrl->dev->of_node, "gpio-ranges")) {
ret = gpiochip_add_pin_range(&pctrl->chip,dev_name(pctrl->dev), 0, 0, chip->ngpio);if (ret) {dev_err(pctrl->dev, "Failed to add pin range\n");gpiochip_remove(&pctrl->chip);return ret;}ret = gpiochip_irqchip_add(chip,