From: Jimmy Assarsson extja@kvaser.com
[ Upstream commit 7c6e6bce08f918b64459415f58061d4d6df44994 ]
Under certain circumstances, when switching from Kvaser's linuxcan driver (kvpciefd) to the SocketCAN driver (kvaser_pciefd), the bus load reporting is not disabled. This is flooding the kernel log with prints like: [3485.574677] kvaser_pciefd 0000:02:00.0: Received unexpected packet type 0x00000009
Always put the controller in the expected state, instead of assuming that bus load reporting is inactive.
Note: If bus load reporting is enabled when the driver is loaded, you will still get a number of bus load packages (and printouts), before it is disabled.
Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Link: https://lore.kernel.org/r/20210309091724.31262-1-jimmyassarsson@gmail.com Signed-off-by: Jimmy Assarsson extja@kvaser.com Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/can/kvaser_pciefd.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index 43151dd6cb1c..99323c273aa5 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -57,6 +57,7 @@ MODULE_DESCRIPTION("CAN driver for Kvaser CAN/PCIe devices"); #define KVASER_PCIEFD_KCAN_STAT_REG 0x418 #define KVASER_PCIEFD_KCAN_MODE_REG 0x41c #define KVASER_PCIEFD_KCAN_BTRN_REG 0x420 +#define KVASER_PCIEFD_KCAN_BUS_LOAD_REG 0x424 #define KVASER_PCIEFD_KCAN_BTRD_REG 0x428 #define KVASER_PCIEFD_KCAN_PWM_REG 0x430 /* Loopback control register */ @@ -949,6 +950,9 @@ static int kvaser_pciefd_setup_can_ctrls(struct kvaser_pciefd *pcie) timer_setup(&can->bec_poll_timer, kvaser_pciefd_bec_poll_timer, 0);
+ /* Disable Bus load reporting */ + iowrite32(0, can->reg_base + KVASER_PCIEFD_KCAN_BUS_LOAD_REG); + tx_npackets = ioread32(can->reg_base + KVASER_PCIEFD_KCAN_TX_NPACKETS_REG); if (((tx_npackets >> KVASER_PCIEFD_KCAN_TX_NPACKETS_MAX_SHIFT) &