From: Anson Huang Anson.Huang@nxp.com
[ Upstream commit d4918ebb5c256d26696a13e78ac68c146111191a ]
The vdd3p0 LDO's input should be from external USB VBUS directly, NOT PMIC's power supply, the vdd3p0 LDO's target output voltage can be controlled by SW, and it requires input voltage to be high enough, with incorrect power supply assigned, if the power supply's voltage is lower than the LDO target output voltage, it will return fail and skip the LDO voltage adjustment, so remove the power supply assignment for vdd3p0 to avoid such scenario.
Fixes: 37a4bdead109 ("ARM: dts: imx6sx-sdb: Assign corresponding power supply for LDOs") Signed-off-by: Anson Huang Anson.Huang@nxp.com Signed-off-by: Shawn Guo shawnguo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/imx6sx-sdb-reva.dts | 4 ---- arch/arm/boot/dts/imx6sx-sdb.dts | 4 ---- 2 files changed, 8 deletions(-)
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index f1830ed387a55..91a7548fdb8db 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -159,10 +159,6 @@ vin-supply = <&vgen6_reg>; };
-®_vdd3p0 { - vin-supply = <&sw2_reg>; -}; - ®_vdd2p5 { vin-supply = <&vgen6_reg>; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index a8ee7087af5a5..5a63ca6157229 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -141,10 +141,6 @@ vin-supply = <&vgen6_reg>; };
-®_vdd3p0 { - vin-supply = <&sw2_reg>; -}; - ®_vdd2p5 { vin-supply = <&vgen6_reg>; };