From: Alexandru Tachici alexandru.tachici@analog.com
[ Upstream commit a526a3cc9c8d426713f8bebc18ebbe39a8495d82 ]
No need to use more than one SPI transfer for reads. Use only one from now as ADIN1110/2111 does not tolerate CS changes during reads.
The BCM2711/2708 SPI controllers worked fine, but the NXP IMX8MM could not keep CS lowered during SPI bursts.
This change aims to make the ADIN1110/2111 driver compatible with both SPI controllers, without any loss of bandwidth/other capabilities.
Fixes: bc93e19d088b ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by: Alexandru Tachici alexandru.tachici@analog.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/adi/adin1110.c | 37 +++++++++++++---------------- 1 file changed, 16 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/adi/adin1110.c b/drivers/net/ethernet/adi/adin1110.c index 606c97610808..9d8dfe172994 100644 --- a/drivers/net/ethernet/adi/adin1110.c +++ b/drivers/net/ethernet/adi/adin1110.c @@ -196,7 +196,7 @@ static int adin1110_read_reg(struct adin1110_priv *priv, u16 reg, u32 *val) { u32 header_len = ADIN1110_RD_HEADER_LEN; u32 read_len = ADIN1110_REG_LEN; - struct spi_transfer t[2] = {0}; + struct spi_transfer t = {0}; int ret;
priv->data[0] = ADIN1110_CD | FIELD_GET(GENMASK(12, 8), reg); @@ -209,17 +209,15 @@ static int adin1110_read_reg(struct adin1110_priv *priv, u16 reg, u32 *val) header_len++; }
- t[0].tx_buf = &priv->data[0]; - t[0].len = header_len; - if (priv->append_crc) read_len++;
memset(&priv->data[header_len], 0, read_len); - t[1].rx_buf = &priv->data[header_len]; - t[1].len = read_len; + t.tx_buf = &priv->data[0]; + t.rx_buf = &priv->data[0]; + t.len = read_len + header_len;
- ret = spi_sync_transfer(priv->spidev, t, 2); + ret = spi_sync_transfer(priv->spidev, &t, 1); if (ret) return ret;
@@ -296,7 +294,7 @@ static int adin1110_read_fifo(struct adin1110_port_priv *port_priv) { struct adin1110_priv *priv = port_priv->priv; u32 header_len = ADIN1110_RD_HEADER_LEN; - struct spi_transfer t[2] = {0}; + struct spi_transfer t; u32 frame_size_no_fcs; struct sk_buff *rxb; u32 frame_size; @@ -327,12 +325,7 @@ static int adin1110_read_fifo(struct adin1110_port_priv *port_priv) return ret;
frame_size_no_fcs = frame_size - ADIN1110_FRAME_HEADER_LEN - ADIN1110_FEC_LEN; - - rxb = netdev_alloc_skb(port_priv->netdev, round_len); - if (!rxb) - return -ENOMEM; - - memset(priv->data, 0, round_len + ADIN1110_RD_HEADER_LEN); + memset(priv->data, 0, ADIN1110_RD_HEADER_LEN);
priv->data[0] = ADIN1110_CD | FIELD_GET(GENMASK(12, 8), reg); priv->data[1] = FIELD_GET(GENMASK(7, 0), reg); @@ -342,21 +335,23 @@ static int adin1110_read_fifo(struct adin1110_port_priv *port_priv) header_len++; }
- skb_put(rxb, frame_size_no_fcs + ADIN1110_FRAME_HEADER_LEN); + rxb = netdev_alloc_skb(port_priv->netdev, round_len + header_len); + if (!rxb) + return -ENOMEM;
- t[0].tx_buf = &priv->data[0]; - t[0].len = header_len; + skb_put(rxb, frame_size_no_fcs + header_len + ADIN1110_FRAME_HEADER_LEN);
- t[1].rx_buf = &rxb->data[0]; - t[1].len = round_len; + t.tx_buf = &priv->data[0]; + t.rx_buf = &rxb->data[0]; + t.len = header_len + round_len;
- ret = spi_sync_transfer(priv->spidev, t, 2); + ret = spi_sync_transfer(priv->spidev, &t, 1); if (ret) { kfree_skb(rxb); return ret; }
- skb_pull(rxb, ADIN1110_FRAME_HEADER_LEN); + skb_pull(rxb, header_len + ADIN1110_FRAME_HEADER_LEN); rxb->protocol = eth_type_trans(rxb, port_priv->netdev);
if ((port_priv->flags & IFF_ALLMULTI && rxb->pkt_type == PACKET_MULTICAST) ||