From: Aya Levin ayal@mellanox.com
[ Upstream commit 4b95840a6ced0634082f6d962ba9aa0ce797f12f ]
Speed translation is performed based on legacy or extended PTYS register. Translate speed with respect to: 1) Capability bit of extended PTYS table. 2) User request: a) When auto-negotiation is turned on, inspect advertisement whether it contains extended link modes. b) When auto-negotiation is turned off, speed > 100Gbps (maximal speed supported in legacy mode). With both conditions fulfilled translation is done with extended PTYS table otherwise use legacy PTYS table. Without this patch 25/50/100 Gbps speed cannot be set, since try to configure in extended mode but read from legacy mode.
Fixes: dd1b9e09c12b ("net/mlx5: ethtool, Allow legacy link-modes configuration via non-extended ptys") Signed-off-by: Aya Levin ayal@mellanox.com Signed-off-by: Saeed Mahameed saeedm@mellanox.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/mellanox/mlx5/core/en/port.c | 27 +++++-- drivers/net/ethernet/mellanox/mlx5/core/en/port.h | 6 + drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 67 +++++++++++++------ 3 files changed, 68 insertions(+), 32 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c @@ -78,9 +78,10 @@ static const u32 mlx5e_ext_link_speed[ML };
static void mlx5e_port_get_speed_arr(struct mlx5_core_dev *mdev, - const u32 **arr, u32 *size) + const u32 **arr, u32 *size, + bool force_legacy) { - bool ext = MLX5_CAP_PCAM_FEATURE(mdev, ptys_extended_ethernet); + bool ext = force_legacy ? false : MLX5_CAP_PCAM_FEATURE(mdev, ptys_extended_ethernet);
*size = ext ? ARRAY_SIZE(mlx5e_ext_link_speed) : ARRAY_SIZE(mlx5e_link_speed); @@ -152,7 +153,8 @@ int mlx5_port_set_eth_ptys(struct mlx5_c sizeof(out), MLX5_REG_PTYS, 0, 1); }
-u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper) +u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper, + bool force_legacy) { unsigned long temp = eth_proto_oper; const u32 *table; @@ -160,7 +162,7 @@ u32 mlx5e_port_ptys2speed(struct mlx5_co u32 max_size; int i;
- mlx5e_port_get_speed_arr(mdev, &table, &max_size); + mlx5e_port_get_speed_arr(mdev, &table, &max_size, force_legacy); i = find_first_bit(&temp, max_size); if (i < max_size) speed = table[i]; @@ -170,6 +172,7 @@ u32 mlx5e_port_ptys2speed(struct mlx5_co int mlx5e_port_linkspeed(struct mlx5_core_dev *mdev, u32 *speed) { struct mlx5e_port_eth_proto eproto; + bool force_legacy = false; bool ext; int err;
@@ -177,8 +180,13 @@ int mlx5e_port_linkspeed(struct mlx5_cor err = mlx5_port_query_eth_proto(mdev, 1, ext, &eproto); if (err) goto out; - - *speed = mlx5e_port_ptys2speed(mdev, eproto.oper); + if (ext && !eproto.admin) { + force_legacy = true; + err = mlx5_port_query_eth_proto(mdev, 1, false, &eproto); + if (err) + goto out; + } + *speed = mlx5e_port_ptys2speed(mdev, eproto.oper, force_legacy); if (!(*speed)) err = -EINVAL;
@@ -201,7 +209,7 @@ int mlx5e_port_max_linkspeed(struct mlx5 if (err) return err;
- mlx5e_port_get_speed_arr(mdev, &table, &max_size); + mlx5e_port_get_speed_arr(mdev, &table, &max_size, false); for (i = 0; i < max_size; ++i) if (eproto.cap & MLX5E_PROT_MASK(i)) max_speed = max(max_speed, table[i]); @@ -210,14 +218,15 @@ int mlx5e_port_max_linkspeed(struct mlx5 return 0; }
-u32 mlx5e_port_speed2linkmodes(struct mlx5_core_dev *mdev, u32 speed) +u32 mlx5e_port_speed2linkmodes(struct mlx5_core_dev *mdev, u32 speed, + bool force_legacy) { u32 link_modes = 0; const u32 *table; u32 max_size; int i;
- mlx5e_port_get_speed_arr(mdev, &table, &max_size); + mlx5e_port_get_speed_arr(mdev, &table, &max_size, force_legacy); for (i = 0; i < max_size; ++i) { if (table[i] == speed) link_modes |= MLX5E_PROT_MASK(i); --- a/drivers/net/ethernet/mellanox/mlx5/core/en/port.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port.h @@ -48,10 +48,12 @@ void mlx5_port_query_eth_autoneg(struct u8 *an_disable_cap, u8 *an_disable_admin); int mlx5_port_set_eth_ptys(struct mlx5_core_dev *dev, bool an_disable, u32 proto_admin, bool ext); -u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper); +u32 mlx5e_port_ptys2speed(struct mlx5_core_dev *mdev, u32 eth_proto_oper, + bool force_legacy); int mlx5e_port_linkspeed(struct mlx5_core_dev *mdev, u32 *speed); int mlx5e_port_max_linkspeed(struct mlx5_core_dev *mdev, u32 *speed); -u32 mlx5e_port_speed2linkmodes(struct mlx5_core_dev *mdev, u32 speed); +u32 mlx5e_port_speed2linkmodes(struct mlx5_core_dev *mdev, u32 speed, + bool force_legacy);
int mlx5e_port_query_pbmc(struct mlx5_core_dev *mdev, void *out); int mlx5e_port_set_pbmc(struct mlx5_core_dev *mdev, void *in); --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -764,7 +764,7 @@ static void ptys2ethtool_supported_adver }
static void get_speed_duplex(struct net_device *netdev, - u32 eth_proto_oper, + u32 eth_proto_oper, bool force_legacy, struct ethtool_link_ksettings *link_ksettings) { struct mlx5e_priv *priv = netdev_priv(netdev); @@ -774,7 +774,7 @@ static void get_speed_duplex(struct net_ if (!netif_carrier_ok(netdev)) goto out;
- speed = mlx5e_port_ptys2speed(priv->mdev, eth_proto_oper); + speed = mlx5e_port_ptys2speed(priv->mdev, eth_proto_oper, force_legacy); if (!speed) { speed = SPEED_UNKNOWN; goto out; @@ -893,8 +893,8 @@ int mlx5e_ethtool_get_link_ksettings(str /* Fields: eth_proto_admin and ext_eth_proto_admin are * mutually exclusive. Hence try reading legacy advertising * when extended advertising is zero. - * admin_ext indicates how eth_proto_admin should be - * interpreted + * admin_ext indicates which proto_admin (ext vs. legacy) + * should be read and interpreted */ admin_ext = ext; if (ext && !eth_proto_admin) { @@ -903,7 +903,7 @@ int mlx5e_ethtool_get_link_ksettings(str admin_ext = false; }
- eth_proto_oper = MLX5_GET_ETH_PROTO(ptys_reg, out, ext, + eth_proto_oper = MLX5_GET_ETH_PROTO(ptys_reg, out, admin_ext, eth_proto_oper); eth_proto_lp = MLX5_GET(ptys_reg, out, eth_proto_lp_advertise); an_disable_admin = MLX5_GET(ptys_reg, out, an_disable_admin); @@ -918,7 +918,8 @@ int mlx5e_ethtool_get_link_ksettings(str get_supported(mdev, eth_proto_cap, link_ksettings); get_advertising(eth_proto_admin, tx_pause, rx_pause, link_ksettings, admin_ext); - get_speed_duplex(priv->netdev, eth_proto_oper, link_ksettings); + get_speed_duplex(priv->netdev, eth_proto_oper, !admin_ext, + link_ksettings);
eth_proto_oper = eth_proto_oper ? eth_proto_oper : eth_proto_cap;
@@ -995,45 +996,69 @@ static u32 mlx5e_ethtool2ptys_ext_adver_ return ptys_modes; }
+static bool ext_link_mode_requested(const unsigned long *adver) +{ +#define MLX5E_MIN_PTYS_EXT_LINK_MODE_BIT ETHTOOL_LINK_MODE_50000baseKR_Full_BIT + int size = __ETHTOOL_LINK_MODE_MASK_NBITS - MLX5E_MIN_PTYS_EXT_LINK_MODE_BIT; + __ETHTOOL_DECLARE_LINK_MODE_MASK(modes); + + bitmap_set(modes, MLX5E_MIN_PTYS_EXT_LINK_MODE_BIT, size); + return bitmap_intersects(modes, adver, __ETHTOOL_LINK_MODE_MASK_NBITS); +} + +static bool ext_speed_requested(u32 speed) +{ +#define MLX5E_MAX_PTYS_LEGACY_SPEED 100000 + return !!(speed > MLX5E_MAX_PTYS_LEGACY_SPEED); +} + +static bool ext_requested(u8 autoneg, const unsigned long *adver, u32 speed) +{ + bool ext_link_mode = ext_link_mode_requested(adver); + bool ext_speed = ext_speed_requested(speed); + + return autoneg == AUTONEG_ENABLE ? ext_link_mode : ext_speed; +} + int mlx5e_ethtool_set_link_ksettings(struct mlx5e_priv *priv, const struct ethtool_link_ksettings *link_ksettings) { struct mlx5_core_dev *mdev = priv->mdev; struct mlx5e_port_eth_proto eproto; + const unsigned long *adver; bool an_changes = false; u8 an_disable_admin; bool ext_supported; - bool ext_requested; u8 an_disable_cap; bool an_disable; u32 link_modes; u8 an_status; + u8 autoneg; u32 speed; + bool ext; int err;
u32 (*ethtool2ptys_adver_func)(const unsigned long *adver);
-#define MLX5E_PTYS_EXT ((1ULL << ETHTOOL_LINK_MODE_50000baseKR_Full_BIT) - 1) + adver = link_ksettings->link_modes.advertising; + autoneg = link_ksettings->base.autoneg; + speed = link_ksettings->base.speed;
- ext_requested = !!(link_ksettings->link_modes.advertising[0] > - MLX5E_PTYS_EXT || - link_ksettings->link_modes.advertising[1]); + ext = ext_requested(autoneg, adver, speed), ext_supported = MLX5_CAP_PCAM_FEATURE(mdev, ptys_extended_ethernet); - ext_requested &= ext_supported; + if (!ext_supported && ext) + return -EOPNOTSUPP;
- speed = link_ksettings->base.speed; - ethtool2ptys_adver_func = ext_requested ? - mlx5e_ethtool2ptys_ext_adver_link : + ethtool2ptys_adver_func = ext ? mlx5e_ethtool2ptys_ext_adver_link : mlx5e_ethtool2ptys_adver_link; - err = mlx5_port_query_eth_proto(mdev, 1, ext_requested, &eproto); + err = mlx5_port_query_eth_proto(mdev, 1, ext, &eproto); if (err) { netdev_err(priv->netdev, "%s: query port eth proto failed: %d\n", __func__, err); goto out; } - link_modes = link_ksettings->base.autoneg == AUTONEG_ENABLE ? - ethtool2ptys_adver_func(link_ksettings->link_modes.advertising) : - mlx5e_port_speed2linkmodes(mdev, speed); + link_modes = autoneg == AUTONEG_ENABLE ? ethtool2ptys_adver_func(adver) : + mlx5e_port_speed2linkmodes(mdev, speed, !ext);
link_modes = link_modes & eproto.cap; if (!link_modes) { @@ -1046,14 +1071,14 @@ int mlx5e_ethtool_set_link_ksettings(str mlx5_port_query_eth_autoneg(mdev, &an_status, &an_disable_cap, &an_disable_admin);
- an_disable = link_ksettings->base.autoneg == AUTONEG_DISABLE; + an_disable = autoneg == AUTONEG_DISABLE; an_changes = ((!an_disable && an_disable_admin) || (an_disable && !an_disable_admin));
if (!an_changes && link_modes == eproto.admin) goto out;
- mlx5_port_set_eth_ptys(mdev, an_disable, link_modes, ext_requested); + mlx5_port_set_eth_ptys(mdev, an_disable, link_modes, ext); mlx5_toggle_port_link(mdev);
out: