From: Robin Gong yibin.gong@nxp.com
[ Upstream commit 6f1cf5257acc6e6242ddf2f52bc7912aed77b79f ]
PFUZE100_SWB_REG is not proper for sw1a/sw2, because enable_mask/enable_reg is not correct. On PFUZE3000, sw1a/sw2 should be the same as sw1a/sw2 on pfuze100 except that voltages are not linear, so add new PFUZE3000_SW_REG and pfuze3000_sw_regulator_ops which like the non-linear PFUZE100_SW_REG and pfuze100_sw_regulator_ops.
Fixes: 1dced996ee70 ("regulator: pfuze100: update voltage setting for pfuze3000 sw1a") Reported-by: Christophe Meynard Christophe.Meynard@ign.fr Signed-off-by: Robin Gong yibin.gong@nxp.com Link: https://lore.kernel.org/r/1592171648-8752-1-git-send-email-yibin.gong@nxp.co... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/regulator/pfuze100-regulator.c | 60 +++++++++++++++++--------- 1 file changed, 39 insertions(+), 21 deletions(-)
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index 69a377ab26041..30e92a9cc97e9 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -196,6 +196,19 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = {
};
+static const struct regulator_ops pfuze3000_sw_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_ascend, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = pfuze100_set_ramp_delay, + +}; + #define PFUZE100_FIXED_REG(_chip, _name, base, voltage) \ [_chip ## _ ## _name] = { \ .desc = { \ @@ -305,23 +318,28 @@ static const struct regulator_ops pfuze100_swb_regulator_ops = { .stby_mask = 0x20, \ }
- -#define PFUZE3000_SW2_REG(_chip, _name, base, min, max, step) { \ - .desc = { \ - .name = #_name,\ - .n_voltages = ((max) - (min)) / (step) + 1, \ - .ops = &pfuze100_sw_regulator_ops, \ - .type = REGULATOR_VOLTAGE, \ - .id = _chip ## _ ## _name, \ - .owner = THIS_MODULE, \ - .min_uV = (min), \ - .uV_step = (step), \ - .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ - .vsel_mask = 0x7, \ - }, \ - .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ - .stby_mask = 0x7, \ -} +/* No linar case for the some switches of PFUZE3000 */ +#define PFUZE3000_SW_REG(_chip, _name, base, mask, voltages) \ + [_chip ## _ ## _name] = { \ + .desc = { \ + .name = #_name, \ + .n_voltages = ARRAY_SIZE(voltages), \ + .ops = &pfuze3000_sw_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _chip ## _ ## _name, \ + .owner = THIS_MODULE, \ + .volt_table = voltages, \ + .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ + .vsel_mask = (mask), \ + .enable_reg = (base) + PFUZE100_MODE_OFFSET, \ + .enable_mask = 0xf, \ + .enable_val = 0x8, \ + .enable_time = 500, \ + }, \ + .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ + .stby_mask = (mask), \ + .sw_reg = true, \ + }
#define PFUZE3000_SW3_REG(_chip, _name, base, min, max, step) { \ .desc = { \ @@ -377,9 +395,9 @@ static struct pfuze_regulator pfuze200_regulators[] = { };
static struct pfuze_regulator pfuze3000_regulators[] = { - PFUZE100_SWB_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), + PFUZE3000_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000), - PFUZE100_SWB_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), + PFUZE3000_SW_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), PFUZE100_SWB_REG(PFUZE3000, SWBST, PFUZE100_SWBSTCON1, 0x3, pfuze100_swbst), PFUZE100_SWB_REG(PFUZE3000, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), @@ -393,8 +411,8 @@ static struct pfuze_regulator pfuze3000_regulators[] = { };
static struct pfuze_regulator pfuze3001_regulators[] = { - PFUZE100_SWB_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), - PFUZE100_SWB_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), + PFUZE3000_SW_REG(PFUZE3001, SW1, PFUZE100_SW1ABVOL, 0x1f, pfuze3000_sw1a), + PFUZE3000_SW_REG(PFUZE3001, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), PFUZE3000_SW3_REG(PFUZE3001, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), PFUZE100_SWB_REG(PFUZE3001, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), PFUZE100_VGEN_REG(PFUZE3001, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000),