This is a note to let you know that I've just added the patch titled
iio: st_pressure: st_accel: Initialise sensor platform data properly
to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git%3Ba=su...
The filename of the patch is: iio-st_pressure-st_accel-initialise-sensor-platform-data-properly.patch and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let stable@vger.kernel.org know about it.
From foo@baz Thu Mar 22 14:57:32 CET 2018
From: Shrirang Bagul shrirang.bagul@canonical.com Date: Wed, 19 Apr 2017 22:05:00 +0800 Subject: iio: st_pressure: st_accel: Initialise sensor platform data properly
From: Shrirang Bagul shrirang.bagul@canonical.com
[ Upstream commit 7383d44b84c94aaca4bf695a6bd8a69f2295ef1a ]
This patch fixes the sensor platform data initialisation for st_pressure and st_accel device drivers. Without this patch, the driver fails to register the sensors when the user removes and re-loads the driver.
1. Unload the kernel modules for st_pressure $ sudo rmmod st_pressure_i2c $ sudo rmmod st_pressure
2. Re-load the driver $ sudo insmod st_pressure $ sudo insmod st_pressure_i2c
Signed-off-by: Jonathan Cameron jic23@kernel.org Acked-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/accel/st_accel_core.c | 7 ++++--- drivers/iio/pressure/st_pressure_core.c | 8 ++++---- 2 files changed, 8 insertions(+), 7 deletions(-)
--- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -628,6 +628,8 @@ static const struct iio_trigger_ops st_a int st_accel_common_probe(struct iio_dev *indio_dev) { struct st_sensor_data *adata = iio_priv(indio_dev); + struct st_sensors_platform_data *pdata = + (struct st_sensors_platform_data *)adata->dev->platform_data; int irq = adata->get_irq_data_ready(indio_dev); int err;
@@ -652,9 +654,8 @@ int st_accel_common_probe(struct iio_dev &adata->sensor_settings->fs.fs_avl[0]; adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;
- if (!adata->dev->platform_data) - adata->dev->platform_data = - (struct st_sensors_platform_data *)&default_accel_pdata; + if (!pdata) + pdata = (struct st_sensors_platform_data *)&default_accel_pdata;
err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data); if (err < 0) --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -436,6 +436,8 @@ static const struct iio_trigger_ops st_p int st_press_common_probe(struct iio_dev *indio_dev) { struct st_sensor_data *press_data = iio_priv(indio_dev); + struct st_sensors_platform_data *pdata = + (struct st_sensors_platform_data *)press_data->dev->platform_data; int irq = press_data->get_irq_data_ready(indio_dev); int err;
@@ -464,10 +466,8 @@ int st_press_common_probe(struct iio_dev press_data->odr = press_data->sensor_settings->odr.odr_avl[0].hz;
/* Some devices don't support a data ready pin. */ - if (!press_data->dev->platform_data && - press_data->sensor_settings->drdy_irq.addr) - press_data->dev->platform_data = - (struct st_sensors_platform_data *)&default_press_pdata; + if (!pdata && press_data->sensor_settings->drdy_irq.addr) + pdata = (struct st_sensors_platform_data *)&default_press_pdata;
err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data); if (err < 0)
Patches currently in stable-queue which might be from shrirang.bagul@canonical.com are
queue-4.4/iio-st_pressure-st_accel-initialise-sensor-platform-data-properly.patch