The patch below does not apply to the 5.10-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y git checkout FETCH_HEAD git cherry-pick -x c2d6fd9d6f35079f1669f0100f05b46708c74b7f # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2023072450-contour-slick-c3db@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..
Possible dependencies:
c2d6fd9d6f35 ("jbd2: recheck chechpointing non-dirty buffer") 4ba3fcdde7e3 ("jbd2,ext4: add a shrinker to release checkpointed buffers") 214eb5a4d8a2 ("jbd2: remove redundant buffer io error checks")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From c2d6fd9d6f35079f1669f0100f05b46708c74b7f Mon Sep 17 00:00:00 2001 From: Zhang Yi yi.zhang@huawei.com Date: Tue, 6 Jun 2023 21:59:23 +0800 Subject: [PATCH] jbd2: recheck chechpointing non-dirty buffer
There is a long-standing metadata corruption issue that happens from time to time, but it's very difficult to reproduce and analyse, benefit from the JBD2_CYCLE_RECORD option, we found out that the problem is the checkpointing process miss to write out some buffers which are raced by another do_get_write_access(). Looks below for detail.
jbd2_log_do_checkpoint() //transaction X //buffer A is dirty and not belones to any transaction __buffer_relink_io() //move it to the IO list __flush_batch() write_dirty_buffer() do_get_write_access() clear_buffer_dirty __jbd2_journal_file_buffer() //add buffer A to a new transaction Y lock_buffer(bh) //doesn't write out __jbd2_journal_remove_checkpoint() //finish checkpoint except buffer A //filesystem corrupt if the new transaction Y isn't fully write out.
Due to the t_checkpoint_list walking loop in jbd2_log_do_checkpoint() have already handles waiting for buffers under IO and re-added new transaction to complete commit, and it also removing cleaned buffers, this makes sure the list will eventually get empty. So it's fine to leave buffers on the t_checkpoint_list while flushing out and completely stop using the t_checkpoint_io_list.
Cc: stable@vger.kernel.org Suggested-by: Jan Kara jack@suse.cz Signed-off-by: Zhang Yi yi.zhang@huawei.com Tested-by: Zhihao Cheng chengzhihao1@huawei.com Reviewed-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20230606135928.434610-2-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o tytso@mit.edu
diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c index 51bd38da21cd..25e3c20eb19f 100644 --- a/fs/jbd2/checkpoint.c +++ b/fs/jbd2/checkpoint.c @@ -57,28 +57,6 @@ static inline void __buffer_unlink(struct journal_head *jh) } }
-/* - * Move a buffer from the checkpoint list to the checkpoint io list - * - * Called with j_list_lock held - */ -static inline void __buffer_relink_io(struct journal_head *jh) -{ - transaction_t *transaction = jh->b_cp_transaction; - - __buffer_unlink_first(jh); - - if (!transaction->t_checkpoint_io_list) { - jh->b_cpnext = jh->b_cpprev = jh; - } else { - jh->b_cpnext = transaction->t_checkpoint_io_list; - jh->b_cpprev = transaction->t_checkpoint_io_list->b_cpprev; - jh->b_cpprev->b_cpnext = jh; - jh->b_cpnext->b_cpprev = jh; - } - transaction->t_checkpoint_io_list = jh; -} - /* * Check a checkpoint buffer could be release or not. * @@ -183,6 +161,7 @@ __flush_batch(journal_t *journal, int *batch_count) struct buffer_head *bh = journal->j_chkpt_bhs[i]; BUFFER_TRACE(bh, "brelse"); __brelse(bh); + journal->j_chkpt_bhs[i] = NULL; } *batch_count = 0; } @@ -242,6 +221,11 @@ int jbd2_log_do_checkpoint(journal_t *journal) jh = transaction->t_checkpoint_list; bh = jh2bh(jh);
+ /* + * The buffer may be writing back, or flushing out in the + * last couple of cycles, or re-adding into a new transaction, + * need to check it again until it's unlocked. + */ if (buffer_locked(bh)) { get_bh(bh); spin_unlock(&journal->j_list_lock); @@ -287,28 +271,32 @@ int jbd2_log_do_checkpoint(journal_t *journal) } if (!buffer_dirty(bh)) { BUFFER_TRACE(bh, "remove from checkpoint"); - if (__jbd2_journal_remove_checkpoint(jh)) - /* The transaction was released; we're done */ + /* + * If the transaction was released or the checkpoint + * list was empty, we're done. + */ + if (__jbd2_journal_remove_checkpoint(jh) || + !transaction->t_checkpoint_list) goto out; - continue; + } else { + /* + * We are about to write the buffer, it could be + * raced by some other transaction shrink or buffer + * re-log logic once we release the j_list_lock, + * leave it on the checkpoint list and check status + * again to make sure it's clean. + */ + BUFFER_TRACE(bh, "queue"); + get_bh(bh); + J_ASSERT_BH(bh, !buffer_jwrite(bh)); + journal->j_chkpt_bhs[batch_count++] = bh; + transaction->t_chp_stats.cs_written++; + transaction->t_checkpoint_list = jh->b_cpnext; } - /* - * Important: we are about to write the buffer, and - * possibly block, while still holding the journal - * lock. We cannot afford to let the transaction - * logic start messing around with this buffer before - * we write it to disk, as that would break - * recoverability. - */ - BUFFER_TRACE(bh, "queue"); - get_bh(bh); - J_ASSERT_BH(bh, !buffer_jwrite(bh)); - journal->j_chkpt_bhs[batch_count++] = bh; - __buffer_relink_io(jh); - transaction->t_chp_stats.cs_written++; + if ((batch_count == JBD2_NR_BATCH) || - need_resched() || - spin_needbreak(&journal->j_list_lock)) + need_resched() || spin_needbreak(&journal->j_list_lock) || + jh2bh(transaction->t_checkpoint_list) == journal->j_chkpt_bhs[0]) goto unlock_and_flush; }
@@ -322,38 +310,6 @@ int jbd2_log_do_checkpoint(journal_t *journal) goto restart; }
- /* - * Now we issued all of the transaction's buffers, let's deal - * with the buffers that are out for I/O. - */ -restart2: - /* Did somebody clean up the transaction in the meanwhile? */ - if (journal->j_checkpoint_transactions != transaction || - transaction->t_tid != this_tid) - goto out; - - while (transaction->t_checkpoint_io_list) { - jh = transaction->t_checkpoint_io_list; - bh = jh2bh(jh); - if (buffer_locked(bh)) { - get_bh(bh); - spin_unlock(&journal->j_list_lock); - wait_on_buffer(bh); - /* the journal_head may have gone by now */ - BUFFER_TRACE(bh, "brelse"); - __brelse(bh); - spin_lock(&journal->j_list_lock); - goto restart2; - } - - /* - * Now in whatever state the buffer currently is, we - * know that it has been written out and so we can - * drop it from the list - */ - if (__jbd2_journal_remove_checkpoint(jh)) - break; - } out: spin_unlock(&journal->j_list_lock); result = jbd2_cleanup_journal_tail(journal);