From: Claudiu Beznea claudiu.beznea@microchip.com
[ Upstream commit 2c1fb9d86f6820abbfaa38a6836157c76ccb4e7b ]
Changing pixel clock source without having this clock source enabled will block the timing engine and the next operations after (in this case setting ATMEL_HLCDC_CFG(5) settings in atmel_hlcdc_crtc_mode_set_nofb() will fail). It is recomended (although in datasheet this is not present) to actually enabled pixel clock source before doing any changes on timing enginge (only SAM9X60 datasheet specifies that the peripheral clock and pixel clock must be enabled before using LCD controller).
Fixes: 1a396789f65a ("drm: add Atmel HLCDC Display Controller support") Signed-off-by: Claudiu Beznea claudiu.beznea@microchip.com Signed-off-by: Sam Ravnborg sam@ravnborg.org Cc: Boris Brezillon boris.brezillon@free-electrons.com Cc: stable@vger.kernel.org # v4.0+ Link: https://patchwork.freedesktop.org/patch/msgid/1576672109-22707-3-git-send-em... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c index d73281095faca..976109c20d493 100644 --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c @@ -79,7 +79,11 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c) struct videomode vm; unsigned long prate; unsigned int cfg; - int div; + int div, ret; + + ret = clk_prepare_enable(crtc->dc->hlcdc->sys_clk); + if (ret) + return;
vm.vfront_porch = adj->crtc_vsync_start - adj->crtc_vdisplay; vm.vback_porch = adj->crtc_vtotal - adj->crtc_vsync_end; @@ -138,6 +142,8 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c) ATMEL_HLCDC_VSPSU | ATMEL_HLCDC_VSPHO | ATMEL_HLCDC_GUARDTIME_MASK | ATMEL_HLCDC_MODE_MASK, cfg); + + clk_disable_unprepare(crtc->dc->hlcdc->sys_clk); }
static enum drm_mode_status