4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cherian, George George.Cherian@cavium.com
commit 11644a7659529730eaf2f166efaabe7c3dc7af8c upstream.
Implement workaround for ThunderX2 Errata-129 (documented in CN99XX Known Issues" available at Cavium support site). As per ThunderX2errata-129, USB 2 device may come up as USB 1 if a connection to a USB 1 device is followed by another connection to a USB 2 device, the link will come up as USB 1 for the USB 2 device.
Resolution: Reset the PHY after the USB 1 device is disconnected. The PHY reset sequence is done using private registers in XHCI register space. After the PHY is reset we check for the PLL lock status and retry the operation if it fails. From our tests, retrying 4 times is sufficient.
Add a new quirk flag XHCI_RESET_PLL_ON_DISCONNECT to invoke the workaround in handle_xhci_port_status().
Cc: stable@vger.kernel.org Signed-off-by: George Cherian george.cherian@cavium.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/usb/host/xhci-pci.c | 5 +++++ drivers/usb/host/xhci-ring.c | 35 ++++++++++++++++++++++++++++++++++- drivers/usb/host/xhci.h | 1 + 3 files changed, 40 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -236,6 +236,11 @@ static void xhci_pci_quirks(struct devic if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7;
+ if ((pdev->vendor == PCI_VENDOR_ID_BROADCOM || + pdev->vendor == PCI_VENDOR_ID_CAVIUM) && + pdev->device == 0x9026) + xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT; + if (xhci->quirks & XHCI_RESET_ON_RESUME) xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "QUIRK: Resetting on resume"); --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1568,6 +1568,35 @@ static void handle_device_notification(s usb_wakeup_notification(udev->parent, udev->portnum); }
+/* + * Quirk hanlder for errata seen on Cavium ThunderX2 processor XHCI + * Controller. + * As per ThunderX2errata-129 USB 2 device may come up as USB 1 + * If a connection to a USB 1 device is followed by another connection + * to a USB 2 device. + * + * Reset the PHY after the USB device is disconnected if device speed + * is less than HCD_USB3. + * Retry the reset sequence max of 4 times checking the PLL lock status. + * + */ +static void xhci_cavium_reset_phy_quirk(struct xhci_hcd *xhci) +{ + struct usb_hcd *hcd = xhci_to_hcd(xhci); + u32 pll_lock_check; + u32 retry_count = 4; + + do { + /* Assert PHY reset */ + writel(0x6F, hcd->regs + 0x1048); + udelay(10); + /* De-assert the PHY reset */ + writel(0x7F, hcd->regs + 0x1048); + udelay(200); + pll_lock_check = readl(hcd->regs + 0x1070); + } while (!(pll_lock_check & 0x1) && --retry_count); +} + static void handle_port_status(struct xhci_hcd *xhci, union xhci_trb *event) { @@ -1725,9 +1754,13 @@ static void handle_port_status(struct xh goto cleanup; }
- if (hcd->speed < HCD_USB3) + if (hcd->speed < HCD_USB3) { xhci_test_and_clear_bit(xhci, port_array, faked_port_index, PORT_PLC); + if ((xhci->quirks & XHCI_RESET_PLL_ON_DISCONNECT) && + (portsc & PORT_CSC) && !(portsc & PORT_CONNECT)) + xhci_cavium_reset_phy_quirk(xhci); + }
cleanup: /* Update event ring dequeue pointer before dropping the lock */ --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1838,6 +1838,7 @@ struct xhci_hcd { #define XHCI_HW_LPM_DISABLE BIT_ULL(29) #define XHCI_SUSPEND_DELAY BIT_ULL(30) #define XHCI_INTEL_USB_ROLE_SW BIT_ULL(31) +#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
unsigned int num_active_eps; unsigned int limit_active_eps;