4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 227630cccdbb8f8a1b24ac26517b75079c9a69c9 ]
This commit fixes 2 issues with host-wake irq trigger type handling in hci_bcm:
1) bcm_setup_sleep sets sleep_params.host_wake_active based on bcm_device.irq_polarity, but bcm_request_irq was always requesting IRQF_TRIGGER_RISING as trigger type independent of irq_polarity.
This was a problem when the irq is described as a GpioInt rather then an Interrupt in the DSDT as for GpioInt-s the value passed to request_irq is honored. This commit fixes this by requesting the correct trigger type depending on bcm_device.irq_polarity.
2) bcm_device.irq_polarity was used to directly store an ACPI polarity value (ACPI_ACTIVE_*). This is undesirable because hci_bcm is also used with device-tree and checking for something like ACPI_ACTIVE_LOW in a non ACPI specific function like bcm_request_irq feels wrong.
This commit fixes this by renaming irq_polarity to irq_active_low and changing its type to a bool.
Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin alexander.levin@verizon.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/bluetooth/hci_bcm.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-)
--- a/drivers/bluetooth/hci_bcm.c +++ b/drivers/bluetooth/hci_bcm.c @@ -68,7 +68,7 @@ struct bcm_device { u32 init_speed; u32 oper_speed; int irq; - u8 irq_polarity; + bool irq_active_low;
#ifdef CONFIG_PM struct hci_uart *hu; @@ -213,7 +213,9 @@ static int bcm_request_irq(struct bcm_da }
err = devm_request_irq(&bdev->pdev->dev, bdev->irq, bcm_host_wake, - IRQF_TRIGGER_RISING, "host_wake", bdev); + bdev->irq_active_low ? IRQF_TRIGGER_FALLING : + IRQF_TRIGGER_RISING, + "host_wake", bdev); if (err) goto unlock;
@@ -253,7 +255,7 @@ static int bcm_setup_sleep(struct hci_ua struct sk_buff *skb; struct bcm_set_sleep_mode sleep_params = default_sleep_params;
- sleep_params.host_wake_active = !bcm->dev->irq_polarity; + sleep_params.host_wake_active = !bcm->dev->irq_active_low;
skb = __hci_cmd_sync(hu->hdev, 0xfc27, sizeof(sleep_params), &sleep_params, HCI_INIT_TIMEOUT); @@ -690,10 +692,8 @@ static const struct acpi_gpio_mapping ac };
#ifdef CONFIG_ACPI -static u8 acpi_active_low = ACPI_ACTIVE_LOW; - /* IRQ polarity of some chipsets are not defined correctly in ACPI table. */ -static const struct dmi_system_id bcm_wrong_irq_dmi_table[] = { +static const struct dmi_system_id bcm_active_low_irq_dmi_table[] = { { .ident = "Asus T100TA", .matches = { @@ -701,7 +701,6 @@ static const struct dmi_system_id bcm_wr "ASUSTeK COMPUTER INC."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"), }, - .driver_data = &acpi_active_low, }, { .ident = "Asus T100CHI", @@ -710,7 +709,6 @@ static const struct dmi_system_id bcm_wr "ASUSTeK COMPUTER INC."), DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100CHI"), }, - .driver_data = &acpi_active_low, }, { /* Handle ThinkPad 8 tablets with BCM2E55 chipset ACPI ID */ .ident = "Lenovo ThinkPad 8", @@ -718,7 +716,6 @@ static const struct dmi_system_id bcm_wr DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"), DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "ThinkPad 8"), }, - .driver_data = &acpi_active_low, }, { } }; @@ -733,13 +730,13 @@ static int bcm_resource(struct acpi_reso switch (ares->type) { case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: irq = &ares->data.extended_irq; - dev->irq_polarity = irq->polarity; + dev->irq_active_low = irq->polarity == ACPI_ACTIVE_LOW; break;
case ACPI_RESOURCE_TYPE_GPIO: gpio = &ares->data.gpio; if (gpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT) - dev->irq_polarity = gpio->polarity; + dev->irq_active_low = gpio->polarity == ACPI_ACTIVE_LOW; break;
case ACPI_RESOURCE_TYPE_SERIAL_BUS: @@ -834,11 +831,11 @@ static int bcm_acpi_probe(struct bcm_dev return ret; acpi_dev_free_resource_list(&resources);
- dmi_id = dmi_first_match(bcm_wrong_irq_dmi_table); + dmi_id = dmi_first_match(bcm_active_low_irq_dmi_table); if (dmi_id) { bt_dev_warn(dev, "%s: Overwriting IRQ polarity to active low", dmi_id->ident); - dev->irq_polarity = *(u8 *)dmi_id->driver_data; + dev->irq_active_low = true; }
return 0;