From: Jonathan Bell jonathan@raspberrypi.org
Seen on a VLI VL805 PCIe to USB controller. For non-stream endpoints at least, if the xHC halts on a particular TRB due to an error then the DCS field in the Out Endpoint Context maintained by the hardware is not updated with the current cycle state.
Using the quirk XHCI_EP_CTX_BROKEN_DCS and instead fetch the DCS bit from the TRB that the xHC stopped on.
[ bjorn: rebased to v5.14-rc2 ] Cc: stable@vger.kernel.org Link: https://github.com/raspberrypi/linux/issues/3060 Signed-off-by: Jonathan Bell jonathan@raspberrypi.org Signed-off-by: Bjørn Mork bjorn@mork.no --- This took some time...
But now it is at least build and runtime tested on top of v5.14-rc2, using an RPi4 and a generic RTL2838 DVB-T radio. Running rtl_test from rtl-sdr on an unpatched v5.14-rc2:
root@idefix:/home/bjorn# rtl_test Found 1 device(s): 0: Realtek, RTL2838UHIDIR, SN: 00000001
Using device 0: Generic RTL2832U OEM rtlsdr_read_reg failed with -7 rtlsdr_write_reg failed with -7 rtlsdr_read_reg failed with -7 rtlsdr_write_reg failed with -7 rtlsdr_read_reg failed with -7 rtlsdr_write_reg failed with -7 rtlsdr_read_reg failed with -7 rtlsdr_write_reg failed with -7 No supported tuner found rtlsdr_demod_write_reg failed with -7 rtlsdr_demod_read_reg failed with -7 rtlsdr_demod_write_reg failed with -7 rtlsdr_demod_read_reg failed with -7 rtlsdr_demod_write_reg failed with -7 rtlsdr_demod_read_reg failed with -7 rtlsdr_demod_write_reg failed with -7 rtlsdr_demod_read_reg failed with -7 Enabled direct sampling mode, input 1 rtlsdr_demod_write_reg failed with -7 rtlsdr_demod_read_reg failed with -7 rtlsdr_demod_write_reg failed with -7 rtlsdr_demod_read_reg failed with -7 rtlsdr_demod_write_reg failed with -7 rtlsdr_demod_read_reg failed with -7 rtlsdr_demod_write_reg failed with -7 rtlsdr_demod_read_reg failed with -7 Supported gain values (1): 0.0 rtlsdr_demod_write_reg failed with -7 rtlsdr_demod_read_reg failed with -7 rtlsdr_demod_write_reg failed with -7 rtlsdr_demod_read_reg failed with -7 rtlsdr_demod_write_reg failed with -7 rtlsdr_demod_read_reg failed with -7 rtlsdr_demod_write_reg failed with -7 rtlsdr_demod_read_reg failed with -7 rtlsdr_demod_write_reg failed with -7 rtlsdr_demod_read_reg failed with -7 rtlsdr_demod_write_reg failed with -7 rtlsdr_demod_read_reg failed with -7 WARNING: Failed to set sample rate. rtlsdr_demod_write_reg failed with -7 rtlsdr_demod_read_reg failed with -7 rtlsdr_write_reg failed with -7 rtlsdr_write_reg failed with -7
Info: This tool will continuously read from the device, and report if samples get lost. If you observe no further output, everything is fine.
Reading samples in async mode... Allocating 15 zero-copy buffers
And with this fix in place:
root@idefix:/home/bjorn# rtl_test Found 1 device(s): 0: Realtek, RTL2838UHIDIR, SN: 00000001
Using device 0: Generic RTL2832U OEM Detached kernel driver Found Fitipower FC0012 tuner Supported gain values (5): -9.9 -4.0 7.1 17.9 19.2 Sampling at 2048000 S/s.
Info: This tool will continuously read from the device, and report if samples get lost. If you observe no further output, everything is fine.
Reading samples in async mode... Allocating 15 zero-copy buffers lost at least 88 bytes
Please apply to stable as well. I'd really like to see this fixed in my favourite distro kernel. You'll probably want Jonathans original patch, as posted in 20210702071338.42777-1-bjorn@mork.no, for anything older than v5.12. I'll resend that for stable once/if this is accepted in mainline.
Bjørn
drivers/usb/host/xhci-pci.c | 4 +++- drivers/usb/host/xhci-ring.c | 25 ++++++++++++++++++++++++- drivers/usb/host/xhci.h | 1 + 3 files changed, 28 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 18c2bbddf080..6f3bed09028c 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -279,8 +279,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == 0x3432) xhci->quirks |= XHCI_BROKEN_STREAMS;
- if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) + if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) { xhci->quirks |= XHCI_LPM_SUPPORT; + xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS; + }
if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 8fea44bbc266..ba978a8fa414 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -559,8 +559,11 @@ static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci, struct xhci_ring *ep_ring; struct xhci_command *cmd; struct xhci_segment *new_seg; + struct xhci_segment *halted_seg = NULL; union xhci_trb *new_deq; int new_cycle; + union xhci_trb *halted_trb; + int index = 0; dma_addr_t addr; u64 hw_dequeue; bool cycle_found = false; @@ -598,7 +601,27 @@ static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci, hw_dequeue = xhci_get_hw_deq(xhci, dev, ep_index, stream_id); new_seg = ep_ring->deq_seg; new_deq = ep_ring->dequeue; - new_cycle = hw_dequeue & 0x1; + + /* + * Quirk: xHC write-back of the DCS field in the hardware dequeue + * pointer is wrong - use the cycle state of the TRB pointed to by + * the dequeue pointer. + */ + if (xhci->quirks & XHCI_EP_CTX_BROKEN_DCS && + !(ep->ep_state & EP_HAS_STREAMS)) + halted_seg = trb_in_td(xhci, td->start_seg, + td->first_trb, td->last_trb, + hw_dequeue & ~0xf, false); + if (halted_seg) { + index = ((dma_addr_t)(hw_dequeue & ~0xf) - halted_seg->dma) / + sizeof(*halted_trb); + halted_trb = &halted_seg->trbs[index]; + new_cycle = halted_trb->generic.field[3] & 0x1; + xhci_dbg(xhci, "Endpoint DCS = %d TRB index = %d cycle = %d\n", + (u8)(hw_dequeue & 0x1), index, new_cycle); + } else { + new_cycle = hw_dequeue & 0x1; + }
/* * We want to find the pointer, segment and cycle state of the new trb diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 3c7d281672ae..911aeb7d8a19 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1896,6 +1896,7 @@ struct xhci_hcd { #define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39) #define XHCI_NO_SOFT_RETRY BIT_ULL(40) #define XHCI_BROKEN_D3COLD BIT_ULL(41) +#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42)
unsigned int num_active_eps; unsigned int limit_active_eps;