From: Wolfram Sang wsa+renesas@sang-engineering.com
[ Upstream commit 2da4b728f994a1f9189a8066b0be90b615768764 ]
R-Car H3 ES1.* was only available to an internal development group and needed a lot of quirks and workarounds. These become a maintenance burden now, so our development group decided to remove upstream support for this SoC and prevent booting it. Public users only have ES2 onwards.
Signed-off-by: Wolfram Sang wsa+renesas@sang-engineering.com Reviewed-by: Kieran Bingham kieran.bingham+renesas@ideasonboard.com Reviewed-by: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 37 ++------------------ drivers/gpu/drm/rcar-du/rcar_du_drv.c | 48 -------------------------- drivers/gpu/drm/rcar-du/rcar_du_drv.h | 2 -- drivers/gpu/drm/rcar-du/rcar_du_regs.h | 3 +- 4 files changed, 4 insertions(+), 86 deletions(-)
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index d6d29be6b4f48..7e175dbfd8924 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c @@ -223,20 +223,6 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc) * DU channels that have a display PLL can't use the internal * system clock, and have no internal clock divider. */ - - /* - * The H3 ES1.x exhibits dot clock duty cycle stability issues. - * We can work around them by configuring the DPLL to twice the - * desired frequency, coupled with a /2 post-divider. Restrict - * the workaround to H3 ES1.x as ES2.0 and all other SoCs have - * no post-divider when a display PLL is present (as shown by - * the workaround breaking HDMI output on M3-W during testing). - */ - if (rcdu->info->quirks & RCAR_DU_QUIRK_H3_ES1_PCLK_STABILITY) { - target *= 2; - div = 1; - } - extclk = clk_get_rate(rcrtc->extclock); rcar_du_dpll_divider(rcrtc, &dpll, extclk, target);
@@ -245,30 +231,13 @@ static void rcar_du_crtc_set_display_timing(struct rcar_du_crtc *rcrtc) | DPLLCR_N(dpll.n) | DPLLCR_M(dpll.m) | DPLLCR_STBY;
- if (rcrtc->index == 1) { + if (rcrtc->index == 1) dpllcr |= DPLLCR_PLCS1 | DPLLCR_INCS_DOTCLKIN1; - } else { - dpllcr |= DPLLCR_PLCS0_PLL + else + dpllcr |= DPLLCR_PLCS0 | DPLLCR_INCS_DOTCLKIN0;
- /* - * On ES2.x we have a single mux controlled via bit 21, - * which selects between DCLKIN source (bit 21 = 0) and - * a PLL source (bit 21 = 1), where the PLL is always - * PLL1. - * - * On ES1.x we have an additional mux, controlled - * via bit 20, for choosing between PLL0 (bit 20 = 0) - * and PLL1 (bit 20 = 1). We always want to use PLL1, - * so on ES1.x, in addition to setting bit 21, we need - * to set the bit 20. - */ - - if (rcdu->info->quirks & RCAR_DU_QUIRK_H3_ES1_PLL) - dpllcr |= DPLLCR_PLCS0_H3ES1X_PLL1; - } - rcar_du_group_write(rcrtc->group, DPLLCR, dpllcr);
escr = ESCR_DCLKSEL_DCLKIN | div; diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c index b9a94c5260e9d..1ffde19cb87fe 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c @@ -16,7 +16,6 @@ #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/slab.h> -#include <linux/sys_soc.h> #include <linux/wait.h>
#include <drm/drm_atomic_helper.h> @@ -387,43 +386,6 @@ static const struct rcar_du_device_info rcar_du_r8a7795_info = { .dpll_mask = BIT(2) | BIT(1), };
-static const struct rcar_du_device_info rcar_du_r8a7795_es1_info = { - .gen = 3, - .features = RCAR_DU_FEATURE_CRTC_IRQ - | RCAR_DU_FEATURE_CRTC_CLOCK - | RCAR_DU_FEATURE_VSP1_SOURCE - | RCAR_DU_FEATURE_INTERLACED - | RCAR_DU_FEATURE_TVM_SYNC, - .quirks = RCAR_DU_QUIRK_H3_ES1_PCLK_STABILITY - | RCAR_DU_QUIRK_H3_ES1_PLL, - .channels_mask = BIT(3) | BIT(2) | BIT(1) | BIT(0), - .routes = { - /* - * R8A7795 has one RGB output, two HDMI outputs and one - * LVDS output. - */ - [RCAR_DU_OUTPUT_DPAD0] = { - .possible_crtcs = BIT(3), - .port = 0, - }, - [RCAR_DU_OUTPUT_HDMI0] = { - .possible_crtcs = BIT(1), - .port = 1, - }, - [RCAR_DU_OUTPUT_HDMI1] = { - .possible_crtcs = BIT(2), - .port = 2, - }, - [RCAR_DU_OUTPUT_LVDS0] = { - .possible_crtcs = BIT(0), - .port = 3, - }, - }, - .num_lvds = 1, - .num_rpf = 5, - .dpll_mask = BIT(2) | BIT(1), -}; - static const struct rcar_du_device_info rcar_du_r8a7796_info = { .gen = 3, .features = RCAR_DU_FEATURE_CRTC_IRQ @@ -614,11 +576,6 @@ static const struct of_device_id rcar_du_of_table[] = {
MODULE_DEVICE_TABLE(of, rcar_du_of_table);
-static const struct soc_device_attribute rcar_du_soc_table[] = { - { .soc_id = "r8a7795", .revision = "ES1.*", .data = &rcar_du_r8a7795_es1_info }, - { /* sentinel */ } -}; - const char *rcar_du_output_name(enum rcar_du_output output) { static const char * const names[] = { @@ -707,7 +664,6 @@ static void rcar_du_shutdown(struct platform_device *pdev)
static int rcar_du_probe(struct platform_device *pdev) { - const struct soc_device_attribute *soc_attr; struct rcar_du_device *rcdu; unsigned int mask; int ret; @@ -725,10 +681,6 @@ static int rcar_du_probe(struct platform_device *pdev)
rcdu->info = of_device_get_match_data(rcdu->dev);
- soc_attr = soc_device_match(rcar_du_soc_table); - if (soc_attr) - rcdu->info = soc_attr->data; - platform_set_drvdata(pdev, rcdu);
/* I/O resources */ diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.h b/drivers/gpu/drm/rcar-du/rcar_du_drv.h index acc3673fefe18..5cfa2bb7ad93d 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.h +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.h @@ -34,8 +34,6 @@ struct rcar_du_device; #define RCAR_DU_FEATURE_NO_BLENDING BIT(5) /* PnMR.SPIM does not have ALP nor EOR bits */
#define RCAR_DU_QUIRK_ALIGN_128B BIT(0) /* Align pitches to 128 bytes */ -#define RCAR_DU_QUIRK_H3_ES1_PCLK_STABILITY BIT(1) /* H3 ES1 has pclk stability issue */ -#define RCAR_DU_QUIRK_H3_ES1_PLL BIT(2) /* H3 ES1 PLL setup differs from non-ES1 */
enum rcar_du_output { RCAR_DU_OUTPUT_DPAD0, diff --git a/drivers/gpu/drm/rcar-du/rcar_du_regs.h b/drivers/gpu/drm/rcar-du/rcar_du_regs.h index 6c750fab6ebb7..391de6661d8bc 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_regs.h +++ b/drivers/gpu/drm/rcar-du/rcar_du_regs.h @@ -283,8 +283,7 @@ #define DPLLCR 0x20044 #define DPLLCR_CODE (0x95 << 24) #define DPLLCR_PLCS1 (1 << 23) -#define DPLLCR_PLCS0_PLL (1 << 21) -#define DPLLCR_PLCS0_H3ES1X_PLL1 (1 << 20) +#define DPLLCR_PLCS0 (1 << 21) #define DPLLCR_CLKE (1 << 18) #define DPLLCR_FDPLL(n) ((n) << 12) #define DPLLCR_N(n) ((n) << 5)