From: Paul Burton paul.burton@mips.com
[ Upstream commit 906d441febc0de974b2a6ef848a8f058f3bfada3 ]
Some versions of GCC for the MIPS architecture suffer from a bug which can lead to instructions from beyond an unreachable statement being incorrectly reordered into earlier branch delay slots if the unreachable statement is the only content of a case in a switch statement. This can lead to seemingly random behaviour, such as invalid memory accesses from incorrectly reordered loads or stores, and link failures on microMIPS builds.
See this potential GCC fix for details:
https://gcc.gnu.org/ml/gcc-patches/2015-09/msg00360.html
Runtime problems resulting from this bug were initially observed using a maltasmvp_defconfig v4.4 kernel built using GCC 4.9.2 (from a Codescape SDK 2015.06-05 toolchain), with the result being an address exception taken after log messages about the L1 caches (during probe of the L2 cache):
Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff] VPE topology {2,2} total 4 Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 64kB, 4-way, PIPT, no aliases, linesize 32 bytes <AdEL exception here>
This is early enough that the kernel exception vectors are not in use, so any further output depends upon the bootloader. This is reproducible in QEMU where no further output occurs - ie. the system hangs here. Given the nature of the bug it may potentially be hit with differing symptoms. The bug is known to affect GCC versions as recent as 7.3, and it is unclear whether GCC 8 fixed it or just happens not to encounter the bug in the testcase found at the link above due to differing optimizations.
This bug can be worked around by placing a volatile asm statement, which GCC is prevented from reordering past, prior to the __builtin_unreachable call.
That was actually done already for other reasons by commit 173a3efd3edb ("bug.h: work around GCC PR82365 in BUG()"), but creates problems for microMIPS builds due to the lack of a .insn directive. The microMIPS ISA allows for interlinking with regular MIPS32 code by repurposing bit 0 of the program counter as an ISA mode bit. To switch modes one changes the value of this bit in the PC. However typical branch instructions encode their offsets as multiples of 2-byte instruction halfwords, which means they cannot change ISA mode - this must be done using either an indirect branch (a jump-register in MIPS terminology) or a dedicated jalx instruction. In order to ensure that regular branches don't attempt to target code in a different ISA which they can't actually switch to, the linker will check that branch targets are code in the same ISA as the branch.
Unfortunately our empty asm volatile statements don't qualify as code, and the link for microMIPS builds fails with errors such as:
arch/mips/mm/dma-default.s:3265: Error: branch to a symbol in another ISA mode arch/mips/mm/dma-default.s:5027: Error: branch to a symbol in another ISA mode
Resolve this by adding a .insn directive within the asm statement which declares that what comes next is code. This may or may not be true, since we don't really know what comes next, but as this code is in an unreachable path anyway that doesn't matter since we won't execute it.
We do this in asm/compiler.h & select CONFIG_HAVE_ARCH_COMPILER_H in order to have this included by linux/compiler_types.h after linux/compiler-gcc.h. This will result in asm/compiler.h being included in all C compilations via the -include linux/compiler_types.h argument in c_flags, which should be harmless.
Signed-off-by: Paul Burton paul.burton@mips.com Fixes: 173a3efd3edb ("bug.h: work around GCC PR82365 in BUG()") Patchwork: https://patchwork.linux-mips.org/patch/20270/ Cc: James Hogan jhogan@kernel.org Cc: Ralf Baechle ralf@linux-mips.org Cc: Arnd Bergmann arnd@arndb.de Cc: linux-mips@linux-mips.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/Kconfig | 1 + arch/mips/include/asm/compiler.h | 35 ++++++++++++++++++++++++++++++++ 2 files changed, 36 insertions(+)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index c82457b0e733..23e3d3e0ee5b 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -29,6 +29,7 @@ config MIPS select GENERIC_SMP_IDLE_THREAD select GENERIC_TIME_VSYSCALL select HANDLE_DOMAIN_IRQ + select HAVE_ARCH_COMPILER_H select HAVE_ARCH_JUMP_LABEL select HAVE_ARCH_KGDB select HAVE_ARCH_MMAP_RND_BITS if MMU diff --git a/arch/mips/include/asm/compiler.h b/arch/mips/include/asm/compiler.h index e081a265f422..cc2eb1b06050 100644 --- a/arch/mips/include/asm/compiler.h +++ b/arch/mips/include/asm/compiler.h @@ -8,6 +8,41 @@ #ifndef _ASM_COMPILER_H #define _ASM_COMPILER_H
+/* + * With GCC 4.5 onwards we can use __builtin_unreachable to indicate to the + * compiler that a particular code path will never be hit. This allows it to be + * optimised out of the generated binary. + * + * Unfortunately at least GCC 4.6.3 through 7.3.0 inclusive suffer from a bug + * that can lead to instructions from beyond an unreachable statement being + * incorrectly reordered into earlier delay slots if the unreachable statement + * is the only content of a case in a switch statement. This can lead to + * seemingly random behaviour, such as invalid memory accesses from incorrectly + * reordered loads or stores. See this potential GCC fix for details: + * + * https://gcc.gnu.org/ml/gcc-patches/2015-09/msg00360.html + * + * It is unclear whether GCC 8 onwards suffer from the same issue - nothing + * relevant is mentioned in GCC 8 release notes and nothing obviously relevant + * stands out in GCC commit logs, but these newer GCC versions generate very + * different code for the testcase which doesn't exhibit the bug. + * + * GCC also handles stack allocation suboptimally when calling noreturn + * functions or calling __builtin_unreachable(): + * + * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82365 + * + * We work around both of these issues by placing a volatile asm statement, + * which GCC is prevented from reordering past, prior to __builtin_unreachable + * calls. + * + * The .insn statement is required to ensure that any branches to the + * statement, which sadly must be kept due to the asm statement, are known to + * be branches to code and satisfy linker requirements for microMIPS kernels. + */ +#undef barrier_before_unreachable +#define barrier_before_unreachable() asm volatile(".insn") + #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4) #define GCC_IMM_ASM() "n" #define GCC_REG_ACCUM "$0"