From: Al Cooper alcooperx@gmail.com
[ Upstream commit 42fed57046fc74586d7058bd51a1c10ac9c690cb ]
The PHY client driver does a phy_exit() call on suspend or rmmod and the PHY driver needs to know the difference because some clocks need to be kept running for suspend but can be shutdown on unbind/rmmod (or if there are no PHY clients at all).
The fix is to use a PM notifier so the driver can tell if a PHY client is calling exit() because of a system suspend or a driver unbind/rmmod.
Signed-off-by: Al Cooper alcooperx@gmail.com Acked-by: Florian Fainelli f.fainelli@gmail.com Link: https://lore.kernel.org/r/20211201180653.35097-2-alcooperx@gmail.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/broadcom/phy-brcm-usb.c | 38 +++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)
diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c index 99fbc7e4138be..b901a0d4e2a80 100644 --- a/drivers/phy/broadcom/phy-brcm-usb.c +++ b/drivers/phy/broadcom/phy-brcm-usb.c @@ -17,6 +17,7 @@ #include <linux/soc/brcmstb/brcmstb.h> #include <dt-bindings/phy/phy.h> #include <linux/mfd/syscon.h> +#include <linux/suspend.h>
#include "phy-brcm-usb-init.h"
@@ -69,12 +70,35 @@ struct brcm_usb_phy_data { int init_count; int wake_irq; struct brcm_usb_phy phys[BRCM_USB_PHY_ID_MAX]; + struct notifier_block pm_notifier; + bool pm_active; };
static s8 *node_reg_names[BRCM_REGS_MAX] = { "crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec" };
+static int brcm_pm_notifier(struct notifier_block *notifier, + unsigned long pm_event, + void *unused) +{ + struct brcm_usb_phy_data *priv = + container_of(notifier, struct brcm_usb_phy_data, pm_notifier); + + switch (pm_event) { + case PM_HIBERNATION_PREPARE: + case PM_SUSPEND_PREPARE: + priv->pm_active = true; + break; + case PM_POST_RESTORE: + case PM_POST_HIBERNATION: + case PM_POST_SUSPEND: + priv->pm_active = false; + break; + } + return NOTIFY_DONE; +} + static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id) { struct phy *gphy = dev_id; @@ -90,6 +114,9 @@ static int brcm_usb_phy_init(struct phy *gphy) struct brcm_usb_phy_data *priv = container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
+ if (priv->pm_active) + return 0; + /* * Use a lock to make sure a second caller waits until * the base phy is inited before using it. @@ -119,6 +146,9 @@ static int brcm_usb_phy_exit(struct phy *gphy) struct brcm_usb_phy_data *priv = container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
+ if (priv->pm_active) + return 0; + dev_dbg(&gphy->dev, "EXIT\n"); if (phy->id == BRCM_USB_PHY_2_0) brcm_usb_uninit_eohci(&priv->ini); @@ -484,6 +514,9 @@ static int brcm_usb_phy_probe(struct platform_device *pdev) if (err) return err;
+ priv->pm_notifier.notifier_call = brcm_pm_notifier; + register_pm_notifier(&priv->pm_notifier); + mutex_init(&priv->mutex);
/* make sure invert settings are correct */ @@ -524,7 +557,10 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
static int brcm_usb_phy_remove(struct platform_device *pdev) { + struct brcm_usb_phy_data *priv = dev_get_drvdata(&pdev->dev); + sysfs_remove_group(&pdev->dev.kobj, &brcm_usb_phy_group); + unregister_pm_notifier(&priv->pm_notifier);
return 0; } @@ -535,6 +571,7 @@ static int brcm_usb_phy_suspend(struct device *dev) struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
if (priv->init_count) { + dev_dbg(dev, "SUSPEND\n"); priv->ini.wake_enabled = device_may_wakeup(dev); if (priv->phys[BRCM_USB_PHY_3_0].inited) brcm_usb_uninit_xhci(&priv->ini); @@ -574,6 +611,7 @@ static int brcm_usb_phy_resume(struct device *dev) * Uninitialize anything that wasn't previously initialized. */ if (priv->init_count) { + dev_dbg(dev, "RESUME\n"); if (priv->wake_irq >= 0) disable_irq_wake(priv->wake_irq); brcm_usb_init_common(&priv->ini);